Will it fit under a lowered car?

Yes. The saddle starts at 4.7 inches, which is low enough for most lowered cars and low-clearance unibody vehicles. Check your car's lowest jacking point clearance before buying.

How much weight can it lift?

It is rated at 2 tons, or 4,000 lb. That covers most sedans, hatchbacks and light SUVs, but not full-size trucks or heavy EVs.

How high does it lift?

The maximum saddle height is 11.8 inches. That is enough for wheel and brake work on most cars but limited for lifted trucks or high-frame vehicles.

Does it have a quick-lift pump?

No. It uses a standard hydraulic pump, so it takes several strokes to reach the car. Jacks with dual-piston quick-lift reach the chassis faster.

What is included in the box?

The jack itself. You supply your own jack stands, which you should always use before going under a vehicle.

Is it good for a full-size truck?

Not really. The 2 ton capacity and 11.8-inch lift fall short of what full-size trucks need. Look for a 3 ton jack with a higher reach.

EDOEMSE Heavy-Duty 2 Ton Low Profile Hydraulic Floor Jack

Best price now

$66.70at WalmartChecked 14 h ago

Prices are checked against each store and labelled with when.

Visit Walmart

EDOEMSE Heavy-Duty 2 Ton Low Profile Hydraulic Floor Jack

Best price now

$66.70at WalmartChecked 14 h ago

Prices are checked against each store and labelled with when.

Visit Walmart

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Last seen at $66.70 at Walmart on Nov 14.

Our take on the EDOEMSE Heavy-Duty 2 Ton Low Profile Hydraulic Floor Jack

The EDOEMSE is a steel hydraulic floor jack rated for 2 tons (4,000 lb) with a low 4.7-inch starting saddle and an 11.8-inch maximum lift. That low start is its main selling point: it slides under lowered cars and low-slung unibody vehicles where standard jacks won't fit. It is a basic single-pump jack with no quick-lift or dual-piston features, so it competes on reach and capacity rather than speed. Buyers comparing it with branded jacks should weigh the low profile against the lack of published warranty and service support.

Best forOwners of lowered or low-clearance carsHome garage and driveway oil changes and tire swapsLight truck and SUV wheel work within 2 tons

Pros

Low 4.7-inch saddle fits under lowered cars
2 ton (4,000 lb) capacity covers most cars and light SUVs
Steel frame built for repeated garage use
11.8-inch max lift gives useful working height
Simple hydraulic operation, no setup beyond bleeding

Cons

No quick-lift or dual-pump speed feature
Heavy steel construction makes it awkward to carry
Little published warranty or parts support from the brand
Saddle height range is modest for lifted trucks

EDOEMSE Heavy-Duty 2 Ton Low Profile Hydraulic Floor Jack prices at every store

WalmartNew
In stockSold by SHUNDAReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
$66.70Free shippingChecked 14 h ago
Visit Walmart

About the EDOEMSE Heavy-Duty 2 Ton Low Profile Hydraulic Floor Jack

This is a 2 ton low profile hydraulic floor jack. It has a lifting range of 4.7" to 11.8" and a 2 ton (4000 lb) capacity. It is designed for low-rider cars and standard vehicles.

The jack is made from heavy-duty steel and is built to withstand heavy use. It is intended for use in a garage or workshop.

Capacity: 2 ton (4000 lb)
Lifting range: 4.7" to 11.8"
Type: Low profile hydraulic floor jack
Material: Heavy-duty steel
Color: Red
Suitable for: Low-rider cars and standard vehicles

Specifications

color: RedSource

Questions and answers

Will it fit under a lowered car?: Yes. The saddle starts at 4.7 inches, which is low enough for most lowered cars and low-clearance unibody vehicles. Check your car's lowest jacking point clearance before buying.
How much weight can it lift?: It is rated at 2 tons, or 4,000 lb. That covers most sedans, hatchbacks and light SUVs, but not full-size trucks or heavy EVs.
How high does it lift?: The maximum saddle height is 11.8 inches. That is enough for wheel and brake work on most cars but limited for lifted trucks or high-frame vehicles.
Does it have a quick-lift pump?: No. It uses a standard hydraulic pump, so it takes several strokes to reach the car. Jacks with dual-piston quick-lift reach the chassis faster.
What is included in the box?: The jack itself. You supply your own jack stands, which you should always use before going under a vehicle.
Is it good for a full-size truck?: Not really. The 2 ton capacity and 11.8-inch lift fall short of what full-size trucks need. Look for a 3 ton jack with a higher reach.
Where is the EDOEMSE Heavy-Duty 2 Ton Low Profile Hydraulic Floor Jack cheapest?: At Walmart, for $66.70, as of our latest check.