The Easy Load Tray XL is a hitch-mounted carrier for transporting fat tire electric trikes and larger, longer hand cycles. It works the same way as the standard Easy Load Tray (ELT) but is built for larger, heavier trikes. Its wheel channels and ramps are about 5 inches wide to fit fat tires and the extreme wheel camber of some hand cycles.
The tray has 13 pieces. The center tube, 2-inch receiver hitch insert and wheel chocks are steel, and the other 10 pieces are aluminum. It weighs about 62 pounds. The trike can be loaded from either side. The tray rotates to vertical on a 1/2-inch clevis pin and has a 3/8-inch safety clevis pin that passes through the center tube. A gravity lock engages when the tray is rotated to vertical.
The tray is powered and connects the vehicle's brake lights and turn signals. The ELT-XL3R version has the same function as the ELT-XL plus a third ramp. This item is not suitable for use with large motor homes, because of the distance from the rear axle to the receiver hitch box.
- Hitch
- 2" receiver hitch
- Hitch clearance
- Receiver hitch must have 16" of ground clearance; a riser is required if the vehicle has less, and the riser must be secured with a second hitch tite
- Max payload
- 145 lbs
- Weight
- Approximately 62 lbs
- Pieces
- 13 total: 10 aluminum; steel center tube, receiver hitch insert and wheel chocks
- Usable space
- About 40.5" front to back
- Wheel channels
- 63" long; can be manipulated to increase left-to-right width
- Ramp width
- Approximately 5"
- Rotation pin
- 1/2" clevis pin; rotates to vertical
- Safety features
- 3/8" clevis pin through the center tube; gravity lock when vertical
- Loading
- From either side
- Lighting
- Connects brake lights and turn signals
- Light connector
- Flat four-pin or round seven-blade
- Versions
- ELT-XL and ELT-XL3R (adds a third ramp)
- Compatibility
- Fat tire trikes and larger, longer hand cycles; compatible with AddMotor M360