
Electro-Harmonix Hum Debugger Guitar Pedal
Best price now
Prices are checked against each store and labelled with when.
Finding cheaper alternatives
Price facts
- Last seen at $161.50 at Rock City Music Co. on Nov 17.
Our take on the Electro-Harmonix Hum Debugger Guitar Pedal
The Hum Debugger is a hum extractor, not a noise gate or suppressor. It removes 50/60 Hz mains hum from a guitar signal without muting the notes, so it works on single-coil pickups and high-gain rigs where gates would only chop the sound. It is a set-and-forget utility pedal rather than a tone effect. Rivals are noise gates and hum-canceling pickups; the Hum Debugger targets the hum itself instead of gating everything above a threshold.
- Targets hum directly rather than gating the whole signal
- Works with any pickup type
- Simple inline connection like any other pedal
- Keeps notes intact instead of chopping quiet passages
- Not a substitute for a noise gate on hiss or buzz
- Can color the tone slightly when engaged
- Only addresses steady mains hum, not all noise
Electro-Harmonix Hum Debugger Guitar Pedal prices at every store
- Rock City Music Co.New
In stockReturn policy
$161.50Checked 9 h ago
About the Electro-Harmonix Hum Debugger Guitar Pedal
The Hum Debugger is an Electro-Harmonix guitar pedal that removes hum from the signal chain. It is a hum extractor, not a noise gate or a noise suppressor. It connects to a guitar like any other effects pedal.
The pedal cleans up the signal chain regardless of pickup type or playing volume. It keeps hum from overtaking the guitar signal and turns hum into dead silence.
- Brand
- Electro-Harmonix
- Type
- Guitar pedal; hum extractor
- Function
- Removes hum from the signal chain
- Design
- Not a noise gate or noise suppressor
- Connection
- Connects like any other effects pedal
- Pickups
- Works with any pickup type
- Playing volume
- Works at any volume
- Signal chain
- Keeps hum from overtaking the guitar signal
Ask our agent about this product
It checks today's price at every store, compares the alternatives and answers in about a minute.
Questions and answers
- Is the Hum Debugger a noise gate?
- No. It extracts hum from the signal rather than muting everything below a threshold. Use a gate for hiss and buzz, and the Hum Debugger for steady mains hum.
- Does it work with single-coil pickups?
- Yes. It is built to clean up hum regardless of pickup type, including single-coils that pick up mains hum.
- Where does it go in the chain?
- Connect it like any other pedal, typically early in the chain after the guitar, so the hum is removed before it reaches gain stages and modulation.
- Will it change my tone?
- It is a utility pedal, but any hum filter can slightly alter the signal when engaged. Many players use it only when hum is present.
- Does it fix all noise?
- No. It targets steady mains hum. Hiss, buzz from dirty power and interference from other sources need separate fixes.
- Where is the Electro-Harmonix Hum Debugger Guitar Pedal cheapest?
- At Rock City Music Co., for $161.50, as of our latest check.






