
Price facts
- Lowest price today: $28.88 at Walmart (checked Nov 20, 2026).
Our take on the ELEGOO ABS-Like Resin 3.0
ELEGOO ABS-Like Resin 3.0 is a white photopolymer resin for MSLA/LCD 3D printers, formulated to cure into parts that resist strain and stress better than standard rigid resin. ELEGOO says the 3.0 formula cuts volume shrinkage during curing, which helps keep dimensions and fine detail accurate. It suits hobbyists and makers printing functional parts, brackets, enclosures and miniatures that need some toughness rather than glass-like stiffness. Against generic standard resins it trades a little crispness for durability; against true ABS-like rivals it sits in the same class, and users typically find it needs more exposure and post-cure than plain resin.
- Tougher and less brittle than standard rigid resin
- Low shrinkage claimed for the 3.0 formula
- Holds fine detail well on high-resolution printers
- Cures to an opaque white that takes primer and paint
- Works on common 405 nm LCD/MSLA printers
- Needs longer exposure and post-cure than standard resin
- Odor and skin irritation risk mean gloves and ventilation are required
- Less sharp than dedicated high-detail or water-washable resins
- White pigment can settle, so the bottle needs shaking
- Finished parts still flex and can deform under sustained load
ELEGOO ABS-Like Resin 3.0 prices at every store
- WalmartNew
In stockSold by heyuanshishunchiReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
$28.88Free shippingChecked 5 h ago
What reviewers say
Owners of ELEGOO ABS-Like resins generally report strong, less brittle prints and good detail, with the main grumbles being smell, the need to dial in exposure, and occasional failed or cloudy prints.
- StrengthPraisedUsers say parts survive drops and bending better than standard resin prints.
- DetailPraisedFine features and small miniatures come out clean on high-resolution printers.
- OdorCriticisedThe resin has a noticeable smell that calls for ventilation.
- ExposureMixedIt usually needs longer exposure and post-cure than standard resin, so settings must be tuned.
- Pigment settlingMixedThe white pigment separates, so the bottle needs thorough shaking before each pour.
About the ELEGOO ABS-Like Resin 3.0
ELEGOO ABS-Like Resin 3.0 is a white resin for 3D printing. It is made for resin prints that require resistance to strain and stress.
The resin reduces volume shrinkage during photocuring. It is intended for high-precision 3D prints.
- Color
- White
- Type
- ABS-like resin
- Version
- 3.0
- Precision
- High precision
- Shrinkage
- Reduced during photocuring
- Use
- Resin prints requiring resistance to strain and stress
Specifications
- color
- Whitewalmart.com
Ask our agent about this product
It checks today's price at every store, compares the alternatives and answers in about a minute.
Questions and answers
- Is ABS-like resin actually as strong as ABS plastic?
- No. It is tougher and more impact-resistant than standard rigid resin, but cured prints are still more brittle than injection-molded ABS and can deform under steady load.
- Does it work on any resin 3D printer?
- It is made for 405 nm LCD/MSLA resin printers. You will need to set exposure times for your printer and resin profile rather than use standard resin settings.
- Do I need to wash and post-cure it?
- Yes. Prints should be cleaned in isopropyl alcohol and then cured under UV light; the resin stays soft and tacky until fully post-cured.
- Is it safe to use indoors?
- Treat it like other photopolymer resins: wear gloves and eye protection, keep it off skin, and print in a ventilated space because of the odor and fumes.
- Can prints be sanded and painted?
- Yes. Cured parts can be sanded, primed and painted; the opaque white base makes color coverage easier.
- How should I store leftover resin?
- Keep the bottle sealed, out of sunlight and away from heat, and filter resin back into it after printing to avoid cured bits contaminating the batch.
- Where is the ELEGOO ABS-Like Resin 3.0 cheapest?
- At Walmart, for $28.88, as of our latest check.









![[Buy More Get More Free] 1000g Standard Resin, Water-wash Standard Resin and Standard Plus Resin](https://cdn.shopify.com/s/files/1/0152/6507/1190/files/blackstandardresin1000g_920a58d2-54d2-4b1f-88aa-d8859b86c42c.jpg?width=600)



![[MOQ: 3Bottles] High Clear Resin 1000G](https://cdn.shopify.com/s/files/1/0753/6010/8742/files/3e4721534b91cc94ebd663f52a864f09e3b184ea250b5a34670138c5c9d56fae_d5a79664-f06f-47db-8bce-782badc9e6ab.webp?width=600)

