Is the Mars 5 good for a first resin printer?

Yes. Auto leveling and the startup self-check remove most of the usual setup work. Budget time to learn resin handling, exposure settings and slicer basics.

What does the Mercury XS bundle add?

It adds a wash-and-cure station so you can clean and post-cure prints without buying separate gear. The printer itself is the same Mars 5.

Do I still need to level the build plate?

The printer levels itself with one click. You should still check the plate and vat are clean and seated before printing.

What comes in the box?

The Mars 5 printer, a USB flash disk, mask, gloves, funnel and backup screws. The Mercury XS station is included in this bundle.

What safety features does it have?

It alarms on resin shortage, residue and leveling failure, and stops printing if the LED temperature exceeds 80 °C.

Can a resin spill damage the screen?

Yes. At least one buyer reported a screen failure after a slight spill, so keep the vat and screen area clean and use the included gloves and mask.

ELEGOO Mars 5 Resin 3D Printer Price History: Lowest $179.00

Q: Where is the ELEGOO Mars 5 Resin 3D Printer and ELEGOO Mercury XS Bundle cheapest?

At www.elegoo.com, for $179.00, as of our latest check.

Q: What do buyers say about the ELEGOO Mars 5 Resin 3D Printer and ELEGOO Mercury XS Bundle?

Rated 4.8 out of 5 from 14 ratings. Buyers like: Easy for beginners, little setup needed; Auto leveling alone is worth the upgrade; Prints wonderfully with perfect quality. Common complaints: Screen malfunctioned after a slight resin spill; Firmware issue after the second print.

What reviewers say

4.8 / 514 ratings

Early buyers rate it highly, mostly for the easy setup and print quality. A minority report hardware and firmware problems and uneven quality control.

What people mention

SetupPraisedBuyers say auto leveling and self-checks make the first setup quick and simple.
Print qualityPraisedOwners describe detailed, clean prints from the 4K mono LCD.
Build platePraisedThe grooved plate and snap bar are said to hold prints well and come off easily.
ReliabilityCriticisedSome units failed early with firmware faults or a dead screen after a spill.
Quality controlCriticisedA few buyers report inconsistent build quality between units.
Beginner confusionMixedNew users praise the setup but some still struggle to get a first successful print.

From www.elegoo.com

6.6-inch 4K mono LCD with COB light source for fine detail
One-click automatic leveling: unbox, power on, print
Smart mechanical sensor with resin shortage, residue and leveling-failure alarms
One-click self-check verifies components before each print
Overheat protection halts printing and alarms if LED temperature exceeds 80 °C
Quick-release build plate and replaceable resin tank lock screws

Guarantee: Up to 1-year warranty; brand new machines and parts not listed otherwise get 12 months, resin printer LCD screens 3 months, resin tank and build plate 3 months;
Returns: Returns accepted within 14 calendar days of receipt for critical defects, transit damage with carrier report, or unopened unused items; non-quality returns may
Shipping: Ships within the US only (48 contiguous states plus D.C.; printers also to Hawaii); in-stock orders estimated 3–7 business days; free standard shipping over a t
Packs: Options: Mars 5 alone, or bundled with Mercury Plus V2.0 & Resin, Mercury X & Resin, Mercury Plus V3.0, or Mercury XS Bundle.
In the box: Mars 5 3D Printer, USB Flash Disk, Mask, Gloves, Funnel, Backup Screws

About the ELEGOO Mars 5 Resin 3D Printer and ELEGOO Mercury XS Bundle

The ELEGOO Mars 5 is a resin 3D printer with a 6.6-inch 4K mono LCD and a COB light source for fine detail. It is sold here as a bundle with the ELEGOO Mercury XS.

Automatic leveling works with one click: unbox, power on and print. A one-click self-check verifies the components before each print. A mechanical sensor alarms for low resin, residue and leveling failure.

If the LED temperature goes above 80 °C, overheat protection halts printing and sounds an alarm. The build plate is quick-release, and the resin tank has lock screws and can be replaced.

Screen: 6.6-inch 4K mono LCD
Light source: COB
Leveling: One-click automatic leveling
Sensor alarms: Resin shortage, residue, leveling failure
Self-check: One-click check of components before each print
Overheat protection: Halts printing and alarms if LED temperature exceeds 80 °C
Build plate: Quick-release
In the box: Mars 5 3D Printer, USB flash disk, mask, gloves, funnel, backup screws