What temperature should I print ELEGOO Matte PLA at?

Treat it like standard PLA: roughly 190–220°C at the nozzle and 50–60°C on a heated bed. Start near the middle of that range and adjust for your printer.

Is matte PLA weaker than regular PLA?

Generally yes, slightly. Matte additives make the filament a bit more brittle, so it is fine for display and light-duty parts but not the best pick for parts that flex or take impacts.

Does it fit a 1.75mm printer?

Yes. The filament is 1.75mm, the common size for most FDM printers, and comes on a 1KG spool.

Will it clog my nozzle?

ELEGOO says the formula resists clogging and bubbles. As with any PLA, keep the nozzle clean and store the spool dry to avoid problems.

What can I print with matte black PLA?

Figures, props, enclosures and other display or light-use parts. The flat finish hides layer lines and avoids the glossy sheen of standard PLA.

Does it need an enclosure?

No. PLA prints well in open air; an enclosure mainly helps with warping-prone materials like ABS.

ELEGOO Matte PLA 3D Printer Filament Matte Black 1KG 1.75mm

Best price now

$18.99at WalmartChecked Nov 11

Prices are checked against each store and labelled with when.

Visit Walmart

ELEGOO Matte PLA 3D Printer Filament Matte Black 1KG 1.75mm

Best price now

$18.99at WalmartChecked Nov 11

Prices are checked against each store and labelled with when.

Visit Walmart

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Last seen at $18.99 at Walmart on Nov 11.

Our take on the ELEGOO Matte PLA 3D Printer Filament Matte Black 1KG 1.75mm

ELEGOO Matte PLA is a 1.75mm filament in matte black that prints with a flat, low-glare surface instead of the usual glossy PLA sheen. ELEGOO formulates it to reduce stringing and warping, and says it resists clogging and bubbles. It suits hobbyists printing display pieces, miniatures and functional parts where a soft finish hides layer lines. Against standard PLA it trades some surface shine for a more premium look; matte blends also tend to be slightly more brittle than plain PLA, so parts that flex or take impact are better in a tougher material.

Best forDisplay models and miniaturesFigurines and cosplay propsFunctional parts where glare mattersHobbyists with a standard 1.75mm FDM printer

Pros

Matte finish hides layer lines and glare
Formulated to limit stringing and warping
1.75mm diameter fits common FDM printers
1KG spool gives a long run between changes
Nozzle-friendly formula claimed to resist clogs and bubbles

Cons

Matte PLA is usually more brittle than standard PLA
Limited to one color per spool
Needs the usual PLA temperature and cooling tuning
Not suited to high-heat or outdoor use

ELEGOO Matte PLA 3D Printer Filament Matte Black 1KG 1.75mm prices at every store

WalmartNew
In stockSold by ELEGOO Official StoreReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
$18.99Free shippingChecked Nov 11
Visit Walmart

About the ELEGOO Matte PLA 3D Printer Filament Matte Black 1KG 1.75mm

This is a matte black PLA filament for 3D printers. It comes as a 1 kg spool of 1.75 mm filament.

The filament has a matte finish. It is made to reduce stringing and deformation, and to print without clogging or bubbles.

Brand: Elegoo
Material: Matte PLA
Color: Matte Black
Diameter: 1.75 mm
Net weight: 1 kg
Finish: Matte

Specifications

color: BlackSource
actual_color: BlackSource

Questions and answers

What temperature should I print ELEGOO Matte PLA at?: Treat it like standard PLA: roughly 190–220°C at the nozzle and 50–60°C on a heated bed. Start near the middle of that range and adjust for your printer.
Is matte PLA weaker than regular PLA?: Generally yes, slightly. Matte additives make the filament a bit more brittle, so it is fine for display and light-duty parts but not the best pick for parts that flex or take impacts.
Does it fit a 1.75mm printer?: Yes. The filament is 1.75mm, the common size for most FDM printers, and comes on a 1KG spool.
Will it clog my nozzle?: ELEGOO says the formula resists clogging and bubbles. As with any PLA, keep the nozzle clean and store the spool dry to avoid problems.
What can I print with matte black PLA?: Figures, props, enclosures and other display or light-use parts. The flat finish hides layer lines and avoids the glossy sheen of standard PLA.
Does it need an enclosure?: No. PLA prints well in open air; an enclosure mainly helps with warping-prone materials like ABS.
Where is the ELEGOO Matte PLA 3D Printer Filament Matte Black 1KG 1.75mm cheapest?: At Walmart, for $18.99, as of our latest check.