It checks today's price at every store, compares the alternatives and answers in about a minute.
The Elegoo Neptune 4 Max is a large-format FDM 3D printer with a 420 x 420 x 480 mm build volume, aimed at makers who need big single-piece prints or batches of smaller parts. It runs Klipper firmware with input shaping sensors, a 300 °C nozzle and 121-point auto bed leveling, and reaches up to 500 mm/s with 8,000 mm/s² acceleration. That puts it ahead of older large beds like the Creality CR-10 series on speed and calibration, though its bed tops out at 85 °C, so ABS and ASA need an enclosure. Owners like the size and speed for the money but note setup and tuning take effort.
In stockShips from Brazil · duties may applyReturn policy
Rated 4.7 out of 5 from 496 ratings, the Neptune 4 Max is well received for its build size and speed at its class. Owners report good results after tuning, while some mention setup effort and the limits of the unheated-chamber setup.
The ELEGOO Neptune 4 Max is an FDM (Fused Deposition Modeling) 3D printer with a 420 × 420 × 480 mm build volume. That is enough room for large models or several smaller objects printed at once. The frame is CNC-machined aluminum extrusion, built for stability during high-speed printing.
It prints at a standard speed of 250 mm/s and a maximum of 500 mm/s, with acceleration up to 8,000 mm/s². Klipper firmware is pre-installed and runs on a 64-bit quad-core ARM processor at 1.5 GHz. It supports input shaping, pressure advance calibration, and vibration and artifact reduction. X/Y-axis acceleration sensors help with calibration.
The 300°C nozzle has a 60W ceramic heating element and a brass heating block. Automatic PID calibration keeps temperature control consistent. A 121-point (11 × 11) auto-leveling system levels the print bed. Files can be sent over Wi-Fi, WLAN or USB, and the printer can be controlled remotely through a web interface. Multiple printers on the same network can be managed together.








