This beanie is made with conductive threads of pure silver. The silver fiber is built to interfere with incoming radio-frequency radiation, including radio and wifi signals, and to dissipate it through a process called attenuation. The fabric is soft and flexible, and it is conductive enough to complete an electric circuit.
The inner RadFab fabric wraps micro threads of silver around a flexible elastic core. The silver side has high conductivity, while the exterior has low conductivity. Conductivity increases when the fabric is under pressure. One side is mottled light gray cotton and the other side is silver colored.
To test it, put a cell phone inside the beanie and try to call it. You can also put it over the antenna of a home wifi router and try to log on. Credit cards, a passport or a car key fob placed inside the beanie cannot be scanned by RFID scanners. The statements about this product have not been evaluated by the Food and Drug Administration. It is not intended to diagnose, treat, cure, or prevent any disease.
- Material
- 70% silver fiber, 30% Chinlon (RadFab inner fabric with a flexible elastic core)
- Shielding
- 40-50 dB (more than 99.99%) over at least 10 MHz to 4 GHz
- Wide-range performance
- More than 99% between 50 Hz and 10 GHz
- Conductivity
- Silver fabric about 2 ohm per sq; exterior about 109 ohm per sq
- Color
- Mottled light gray on the cotton side, silver on the other side
- Features
- Anti-static, ground-able, silver is anti-microbial and anti-odor
- RFID blocking
- Cards, passport and car key fob inside the beanie cannot be scanned
- Care
- Hand wash gently with neutral detergent, water below 40°C (104°F). No bleach, no strongly alkaline detergent, no wringing, no dry cleaning. Hang dry, out of direct sun for long periods.