It checks today's price at every store, compares the alternatives and answers in about a minute.
Easy Cast is a two-part, clear epoxy casting resin mixed 1:1 by volume. It pours with very low viscosity, so it flows into molds and around embedded objects and dyes before it gels, and it cures without UV light. Working time is about 40 minutes at room temperature, with full hardening in roughly 12 to 24 hours. It suits jewelry makers, crafters and small casting and coating projects; the main limit is depth, since pours should stay at or under 3/8 inch per layer.
In stockReturn policy
Buyers of this resin line generally report clear, solid casts and an easy 1:1 mix. Complaints center on bubbles and the need for thin layers on deeper molds.
This is a two-part epoxy casting resin in an 8 oz set. The set contains Part A resin, Part B hardener and an instruction sheet. The resin is clear and has an ultra-low viscosity.
Mix equal parts A and B at a 1:1 ratio. Working time is 40 minutes at room temperature, and the resin fully hardens in 12-15 hours at room temperature. A casting can be up to 3/8 inch thick. No UV light is needed, and the resin has a low odor.
It is used for jewelry, crafts, casting and coating, and objects or dyes can be inserted into it. Always work in a well-ventilated area when working with the resin.


