

This is a 14-inch carbide-tipped (TCT) circular saw blade built for cutting mild steel on low-speed saws. Its 66 teeth and 0.094-inch kerf are aimed at clean, burr-light cuts in ferrous metal rather than wood. It fits a 1-inch arbor and is rated to a maximum of 1,600 rpm, so it belongs on dry-cut and chop saws, not high-speed wood saws. It suits fabricators and shop users cutting mild steel stock on saws like the Evolution S380CPS, DeWalt DW872 or Milwaukee 6190-20. Against abrasive chopsaw wheels it cuts faster and cooler with less dust, but it is limited to mild steel and is not for galvanized, hardened or high-carbon steel.
In stockReturn policy
Buyers rate this blade highly, with most praise going to clean cuts in mild steel and its fit on common 14-inch low-rpm saws. Complaints are fewer and tend to involve tip damage or short life when the blade is pushed or used on the wrong steel.
This is a 14 in. circular saw blade with 66 carbide teeth and a 1 in. arbor, made to cut mild steel. The teeth are carbide, brazed to a hardened steel blade body.
The blade has a kerf of 0.094 in. and a maximum speed of 1,600 rpm. It is made for low-rpm saws.
Use it on mild steel only. Do not use it on galvanized, hardened or high-carbon steel.
It checks today's price at every store, compares the alternatives and answers in about a minute.