

A 7-1/4 inch carbide-tipped circular saw blade with 40 teeth, a 20mm arbor and a 0.078 inch kerf, built for cutting mild steel on Evolution saws and on standard circular saws with the included arbor reduction ring. The 40-tooth grind is aimed at cleaner, cooler cuts in steel than a low-tooth framing blade gives, and the carbide tips hold up far longer than abrasive discs, though the blade is limited to mild steel. It suits fabricators and tradespeople cutting plate, angle, tube and studding who want a saw-cut finish instead of a hot, gritty abrasive cut. Against general-purpose wood blades it trades speed in timber for steel capability; against abrasive chop saws it cuts faster and cleaner but costs more and demands a saw rated for the speed and the material.
In stockReturn policy
Rated 4.7 out of 5 across 196 ratings, buyers report clean, fast cuts in mild steel and long life compared with abrasive discs. Complaints center on the mild-steel-only limit and on tips dulling or chipping when pushed into harder stock.
The Evolution 185BLADEST is a 7-1/4 inch TCT circular saw blade with 40 teeth and a 20 mm arbor. It has a 0.078 inch kerf and a maximum speed of 3,900 rpm. A 25/32 in. to 5/8 in. arbor reduction ring is included.
The blade is designed to cut mild steel only. Do not use it on galvanized, hardened (cold rolled/formed), or high-carbon steel.
It fits Evolution EVOSAW180HD, RAGE-B, EVOSAW185HD, S185CCS and RAGE4 saws, Steelmax S7, and standard circular saws.
It checks today's price at every store, compares the alternatives and answers in about a minute.