What can the S210CCS cut?

It is set up for mild steel with its 8-1/4 inch, 50-tooth carbide blade. It cuts plate, tube and angle with a cool, burr-free finish. Hardened or stainless stock needs a suitable blade.

Does it need a special blade?

Yes. It uses Evolution's carbide-tipped metal-cutting blades, not abrasive discs. The included 50-tooth blade is for mild steel.

How does chip collection work?

Chips are drawn into an integrated collector as the saw cuts. Evolution claims a 60% higher collection rate than its earlier design. Expect to empty it and still sweep up a little.

Is it corded or cordless?

It is a corded saw, so it runs from mains power. That suits bench and shop work rather than site work away from an outlet.

What is the overload system for?

It monitors motor temperature and protects the motor from overheating during heavy or prolonged cuts. Let the saw cool if it trips.

Can it make straight cuts along sheet?

Yes. A full-length parallel edge guide and sightlines on the steel base help keep cuts straight along sheet and angle.

What do buyers say about the Evolution S210CCS Metal Cutting Circular Saw?

Rated 4.7 out of 5 from 86 ratings.

Where can I buy the Evolution S210CCS Metal Cutting Circular Saw?

16 stores we checked sell it, including Amazon, Home Depot, Evolution Power Tools US, Walmart, Beaver Industrial Supply.

Evolution S210CCS Metal Cutting Circular Saw

Q: Where is the Evolution S210CCS Metal Cutting Circular Saw cheapest?

At Amazon, for $289.10, as of our latest check.

Best price now

$289.10at AmazonChecked 1 h ago

Compared across 16 stores. Prices are checked against each store and labelled with when. Store links may earn us a commission. As an Amazon Associate, Deal.ai earns from qualifying purchases.

Visit Amazon

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

What reviewers say

4.7 / 586 ratings

Owners rate it highly, praising clean, cool cuts on mild steel and the chip collection that keeps the work area tidier. The blade brake and overload protection draw positive mentions. Some note the saw is heavy and that chip collection is good but not total.

What people mention

Cut qualityPraisedOwners say edges come off the saw clean and ready to weld, without the burr an abrasive disc leaves.
Heat and sparksPraisedReviewers note the cut stays cool and throws no sparks, unlike abrasive cutting.
Chip collectionMixedBuyers like the contained swarf but say collection is good rather than complete.
Blade brakePraisedThe electronic brake stops the blade quickly when the trigger is released.
WeightCriticisedSome owners find the saw heavy to carry and handle over long jobs.
Blade material limitsMixedThe supplied blade is tuned for mild steel, so harder stock needs a different blade.

About the Evolution S210CCS Metal Cutting Circular Saw

The Evolution S210CCS is a heavy-duty circular saw for cutting metal, with an integrated chip collector. It uses TCT (tungsten carbide tipped) blade technology instead of abrasive discs. It leaves a cool-to-the-touch, burr-free finish that is ready for the welding table, with virtually no heat, burr or sparks.

A high-torque motor cuts 1/2 inch steel plate. Advanced cooling keeps the motor at its optimum temperature for repeat cutting. An overload system monitors motor temperature and gives a visual warning if the saw is being overloaded. An electronic blade brake stops the blade quickly when the trigger is released.

Metal chips are deflected into an onboard chip collector that holds up to 60% more than the EVOSAW230. A quick-release latch empties the collector and helps with blade changes. The saw has a full-length parallel edge guide, a heavy-duty steel base with sightlines and workpiece contact guides, and a quick-release depth lever for plunge cuts. A large blade viewing window and an internal LED work light improve cutline visibility in low light. The ambidextrous, ergonomic handles have a rubber over-mold and a safety trigger lock-off.

Blade included

8-1/4 in., 50 tooth mild steel cutting TCT blade

Max. depth of cut

3 in. at 0°

Mild steel plate

Up to 1/2 in. thick

Mild steel square tube

Up to 1/4 in. wall thickness

Min. cut-off length

5/16 in.

Materials

Mild steel, stainless steel, aluminum and wood (with optional blades)