
Falcon 10W CR-Laser Engraver and Cutter
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
The Creality Falcon 10W is a desktop diode laser engraver and cutter with a 400 x 415mm work area and a 10W output module. It engraves at up to 10,000mm/min with a 0.06 x 0.08mm spot, cuts 5mm black acrylic or 6mm basswood in one pass, and can cut 12mm material with multiple passes. Optional raisers lift the module to work on objects up to 150mm tall. Its safety package — flame detection, an eye-friendly module cover and an active stop — is stronger than most budget diode lasers, and the all-steel wheels and belt drive keep motion stable. It suits hobbyists and small shops who want a large bed and safety features without moving to a CO2 machine.
In stockReturn policy
Rated 4.6 out of 5 from 49 ratings, buyers mostly praise the Falcon 10W for its large bed, fast engraving and safety features. Complaints center on the limits of a 10W diode on clear acrylic and thick stock, and on setup time.
The Falcon 10W CR-Laser Engraver and Cutter is a desktop laser machine with a 10W output and a 400 x 415 mm engraving area. Engraving accuracy is 0.06 x 0.08 mm, and travel speed reaches 10000 mm/m.
It cuts up to 12 mm in one pass, with one-pass figures of 5 mm black acrylic and 6 mm basswood. Optional raisers raise the working height to 150 mm for larger objects.
The motion system uses all-steel wheels, shafts and belts on a stable frame. Safety features include flame detection, a protective cover over the laser module and an active stop function. A built-in leveler, measuring scales on the axis profiles and 3-step focusing are part of the setup.
It checks today's price at every store, compares the alternatives and answers in about a minute.