It checks today's price at every store, compares the alternatives and answers in about a minute.
The FeatherPRO Featherboard (FP1) is a hold-down featherboard built around high-density EVA feathers instead of the usual plastic or wood fingers. Its living-hinge geometry pinches stock against the fence, absorbs vibration and is claimed to resist kickback up to five times better than rigid featherboards. It mounts in a standard ¾" miter slot or T-track and fits table saws, band saws, router tables and fences. It suits woodworkers who want smoother feed and cleaner cuts on thin or soft stock, and who value blade-safe, non-marring material over the cheaper plastic featherboards most shops start with.
In stockReturn policy
Owners rate it very highly, with 39 ratings averaging 4.9 out of 5. Users praise the grip and smooth feed, the blade-safe EVA material and the quick miter-bar setup.
The FeatherPRO Featherboard (FP1) holds stock firmly against a fence on table saws, band saws, router tables, and router or saw fences. It mounts in a standard 3/4 in miter slot or in T-track. The feathers are made of high-density, closed-cell EVA.
The EVA feathers use a living-hinge design that pinches the board against the fence and absorbs impact energy, for up to 5× greater kickback resistance than plastic or wood feathers. They increase surface contact with the workpiece for a smoother glide and less deflection than rigid plastic feathers. EVA absorbs vibration and minimizes chatter, and it is non-marring even on the softest woods.
The feathers are reversible for left or right feeds and replaceable when worn. The AnchorPRO miter bar is a patented expansion bar with ergonomic knobs for tool-free adjustment and a zero-play hold in the miter slot. Two 6 in travel slots allow adjustment. Position the featherboard at least 1 in forward of the blade in the direction of feed on a table saw or band saw table; on a fence it can go before or after the blade, and on a router table before or after the bit but not directly over or beside it.