The Fibropool FH220 is a swimming pool heat pump that puts out 20,000 BTU. It heats above-ground pools up to 15 feet round or 12 x 24 feet oval, and in-ground pools up to 5,000 gallons. It returns about 4.85 times the heat for every dollar of electricity it uses.
The case is weatherproof, enamel-coated steel made to withstand outdoor conditions. A digital controller runs the unit. It installs with the included fittings and connects to an existing pool system. An optional extension cord is available for more flexible placement.
It runs on a 240V, 60 Hz circuit, not a 120V 3-prong plug. Heat pumps do not produce 85 to 100 degree pool water. Initial heating may take 2 to 3 days to reach the desired temperature. Covering the pool with a bubble cover or plastic sheet helps hold in the heat.
- Heat output
- 20,000 BTU
- Power
- 240V, 60 Hz circuit (not a 120V 3-prong plug)
- Above-ground pools
- Up to 15 ft round or 12 x 24 ft oval
- In-ground pools
- Up to 5,000 gallons
- Rating
- Heats water to 82 degrees at 82% humidity
- Case
- Weatherproof enamel-coated steel
- Controls
- Digital controller
- Installation
- Fittings included; optional extension cord
- Dimensions
- 33" x 14" x 26" (with packaging)
- Weight
- 74 lbs (with packaging)