What temperatures should I print this PETG at?

PETG generally prints around 230-250 C at the nozzle with a bed near 70-80 C. Start in that range and tune for your printer and part cooling.

Will it fit my printer?

It is 1.75 mm filament, the common size for most FDM printers. Check that your printer takes 1.75 mm and that its spool holder handles a 250 g spool.

Is PETG better than PLA for my parts?

PETG is tougher, less brittle and more heat-resistant than PLA, which suits functional parts. PLA is easier to print and better for fine detail and display models.

How much can I print with 250 g?

Expect a modest number of small to medium parts. It is enough to test settings and a color, not for large multi-part projects.

Does PETG need drying before use?

PETG absorbs moisture, which causes popping and rough surfaces. If prints look bubbly or stringy, dry the spool before printing.

Does it need an enclosure?

No. PETG prints on open printers with a heated bed. An enclosure mainly helps with drafts and large ABS or ASA parts.

Filajoy3D PETG 3D Printer Filament 1.75mm 250G

Best price now

$11.86at WalmartChecked Nov 11

Prices are checked against each store and labelled with when.

Visit Walmart

Filajoy3D PETG 3D Printer Filament 1.75mm 250G

Best price now

$11.86at WalmartChecked Nov 11

Prices are checked against each store and labelled with when.

Visit Walmart

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Last seen at $11.86 at Walmart on Nov 11.

Our take on the Filajoy3D PETG 3D Printer Filament 1.75mm 250G

This is a 250 g spool of Filajoy3D PETG filament in pink, 1.75 mm diameter, for FDM printers. PETG is tougher and less brittle than PLA and holds up better to heat and moisture, while printing at higher nozzle temperatures. The stated dimensional tolerance is +/- 0.03 mm, which is a reasonable figure for consistent feeding. The small 250 g spool suits testing a color or a material before committing to a full kilogram.

Best forTrying PETG for the first timeSmall parts and prototypesPrinters with a heated bedShoppers who want a pink accent color

Pros

PETG: tougher and more heat-resistant than PLA
1.75 mm diameter fits most FDM printers
Stated +/- 0.03 mm diameter tolerance
Small 250 g spool for testing
Single pink color for accent prints

Cons

Only 250 g, so limited print volume
PETG needs higher nozzle and bed temperatures than PLA
Can string and ooze without tuned retraction
Needs a heated bed and good first-layer adhesion
No drying or storage guidance in the listing

Filajoy3D PETG 3D Printer Filament 1.75mm 250G prices at every store

WalmartNew
In stockSold by Filajoy3DReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
$11.86+ $5.99 shippingChecked Nov 11
Visit Walmart

About the Filajoy3D PETG 3D Printer Filament 1.75mm 250G

This is a PETG 3D printer filament in a 1.75mm diameter. The spool holds 250g (0.25kg) of filament.

Dimensional accuracy is +/- 0.03mm. The filament is made for use with most FDM 3D printers.

Brand: Filajoy3D
Material: PETG
Diameter: 1.75mm
Dimensional accuracy: +/- 0.03mm
Net weight: 250g (0.25kg)
Color: Pink
Compatibility: Most FDM 3D printers

Specifications

color: PinkSource
actual_color: petg pink-250g-Source

Questions and answers

What temperatures should I print this PETG at?: PETG generally prints around 230-250 C at the nozzle with a bed near 70-80 C. Start in that range and tune for your printer and part cooling.
Will it fit my printer?: It is 1.75 mm filament, the common size for most FDM printers. Check that your printer takes 1.75 mm and that its spool holder handles a 250 g spool.
Is PETG better than PLA for my parts?: PETG is tougher, less brittle and more heat-resistant than PLA, which suits functional parts. PLA is easier to print and better for fine detail and display models.
How much can I print with 250 g?: Expect a modest number of small to medium parts. It is enough to test settings and a color, not for large multi-part projects.
Does PETG need drying before use?: PETG absorbs moisture, which causes popping and rough surfaces. If prints look bubbly or stringy, dry the spool before printing.
Does it need an enclosure?: No. PETG prints on open printers with a heated bed. An enclosure mainly helps with drafts and large ABS or ASA parts.
Where is the Filajoy3D PETG 3D Printer Filament 1.75mm 250G cheapest?: At Walmart, for $11.86, as of our latest check.