This 5-piece palm carving set is made for fine detail work on figurines, relief carvings and linocut blocks. The short mushroom-shaped handles sit in the palm and pass pressure straight to the cutting edge, which gives close control for faces, animal textures and small patterns.
Each blade is hand-forged from W1-7 high-carbon steel, put through an 11-stage tempering process and hardened to 60-62 HRC. The blades are 2 mm thick and 40 mm long. The handles are oak finished with natural linseed oil. The tools are honed and stropped for use on hardwoods such as white oak and walnut and softwoods such as basswood and lime.
The set has one V-tool and four gouges, including a #9 bent gouge for hollowing tight recesses where a straight shank would interfere with the workpiece. A natural wood storage box is included. The tools are made in Ukraine.
- Pieces
- 5 palm tools plus a storage box
- V-tool
- Palm V-Tool 45°, 3 mm (Art. 134503)
- Gouge #8
- Palm Gouge Sweep #8, 10 mm (Art. 130810)
- Gouge #7
- Palm Gouge Sweep #7, 5 mm (Art. 130705)
- Bent gouge
- Palm Bent Gouge Sweep #9, 5 mm (Art. 140905)
- Gouge #9
- Palm Gouge Sweep #9, 3 mm (Art. 130903)
- Blade steel
- Hand-forged W1-7 high-carbon steel
- Hardness
- 60-62 HRC
- Blade length
- 40 mm
- Metal thickness
- 2 mm
- Handle
- Mushroom-shaped oak, finished with natural linseed oil
- Suitable woods
- Hardwoods (white oak, walnut) and softwoods (basswood, lime)
- Origin
- Made in Ukraine
- In the box
- 5 palm carving tools, natural wood storage box