
Price facts
- Lowest price today: $99.95 at Right Channel Radios (checked Nov 17, 2026).

A complete no-ground-plane CB antenna kit for vehicles without a metal body, such as fiberglass RVs, motorhomes and campers. It includes a roof mount, spring, no-ground antenna and 17 feet of coax, and stands 27 inches off the mount surface for a low-profile install. The no-ground design is the point: standard CB antennas need a metal chassis as a ground plane, and this kit is engineered to work without one. Buyers rate it highly, and it suits RV and camper owners who want a clean roof install rather than a tall whip on a metal-bodied truck.
In stockReturn policy
Owners rate the kit very highly and treat it as a reliable solution for CB radio on fiberglass RVs and campers. The no-ground design and complete contents come in for the most praise.
The Firestik NGP Roof Mount CB Antenna Kit is a no-ground-plane CB antenna kit for vehicles that lack a metallic chassis. It is designed for non-metal surfaces such as fiberglass and wood, including RV and motorhome roofs, boat decks, pickup camper roofs or caps, and fiberglass or aluminum tractor roofs. The kit includes a 2 ft NGP antenna, a circular stainless steel roof mount, a stainless steel spring, 17 ft of NGP coax cable, and a wire mic hanger.
The antenna uses a 5/8 wave design and a 3/8 inch (0.375 inch or 10 mm) reinforced plastic (fiberglass) core. It has a patented no-tools-required tunable tip for SWR adjustments and is rated at 100 watts. The coax is a custom-manufactured Firestik NGP cable that connects only to Firestik NGP antennas; standard RG-58 A/U cable can be added between the radio and the NGP cable, preferably in lengths that are multiples of nine feet, but the NGP cable length cannot be reduced. The roof mount is stainless steel with a rubber sealing gasket, the spring is stainless steel with machined brass ends, and the mounting hardware is stainless steel, weather- and rust-resistant.
The roof mount is made for a flat horizontal surface with access from below. The roof is sandwiched between the two mount plates, and the coax connects from below. The kit stands 27 inches off the mount surface when installed; including the spring and antenna, the installed height above the roofline is just less than 29 inches (737 mm). It works with virtually all CB radios and has an approximate range of 1 to 2 miles.
It checks today's price at every store, compares the alternatives and answers in about a minute.






