The Flarespace Half-Slider Bunk Window (Passenger Side, FS1033R) is a smaller rear sliding window for camper vans with rear beds. It suits vans such as the Mercedes Sprinter, Ford Transit, Ram Promaster and Nissan NV. It fits the passenger side of any van model.
It is a single-pane half-slider. The opening panel slides horizontally and has a detachable screen. The glass is tempered and has a 28% dark gray factory tint. It is tested to ANSI Z26.1 and FMVSS 205 safety standards.
This is a clamp-in window with pre-applied weatherstripping, so no sealant, tape or adhesive is needed to install it. It clamps directly onto the van's sheet metal, with no brackets, adapters or spacers. A 1/8" clamp ring, which also serves as a trim ring, is mounted with screws.
- Model
- FS1033R (Passenger Side)
- Window type
- Fixed slider, screened, clamp-in
- Glass
- Single-pane tempered glass
- Tint
- 28% dark gray
- Cut-out size
- 33" wide x 10" high
- Outside frame
- 33-7/8" x 10-7/8"
- Clamp ring
- 1/8", doubles as trim ring, mounted with screws
- Screen
- Detachable
- Weatherstripping
- Pre-applied
- Safety standards
- ANSI Z26.1, FMVSS 205
- Fits
- Passenger side of all van models
- Weight
- 15 lbs (shipping weight)
- Installation
- Template useful but not included. Paint the cut edges of the opening and keep the weep holes at the bottom of the frame clear. Pre-drilling the self-tapping screws with a 1/16" metal drill bit is opti