
Flashforge 3D Printer Adventurer 5M
Best price now
Prices are checked against each store and labelled with when.
Finding cheaper alternatives
Price facts
- Lowest price today: $39.03 at CCC (checked Nov 20, 2026).
Our take on the Flashforge 3D Printer Adventurer 5M
The Flashforge Adventurer 5M is a fast, beginner-friendly FDM printer with full-auto one-click bed leveling and a quick-release nozzle system. It prints at up to 600 mm/s with 20,000 mm/s² acceleration, backed by vibration compensation and dual-fan cooling to keep fast prints clean. Swappable 0.25, 0.4, 0.6 and 0.8 mm nozzles let it move from fine detail to fast, sturdy parts. It suits newcomers who want a near plug-and-play machine and hobbyists who want speed without heavy tuning; it is not an enclosed printer, so high-temperature and warp-prone filaments are a harder fit than on enclosed rivals.
- Full-auto one-click leveling removes first-layer guesswork
- Quick-release nozzles in four diameters
- High speed: 600 mm/s and 20,000 mm/s² acceleration
- Vibration compensation and dual-fan cooling for cleaner fast prints
- Sturdy open-frame build
- Open frame, so no enclosure for ABS or draft-sensitive materials
- High speeds need well-tuned profiles to avoid artifacts
- Nozzle changes add cost and setup time
- Not aimed at advanced users who want multi-material or large build volumes
Flashforge 3D Printer Adventurer 5M prices at every store
- CCCNew
In stockShips from France · duties may applyReturn policy
$39.03Checked 6 h ago
What reviewers say
Owners and reviewers treat the Adventurer 5M as one of the easier fast printers to live with, crediting auto-leveling and the quick-swap nozzle for low-friction setup. Most praise its speed for the class; some note that pushing top speeds needs profile tuning and that the open frame limits material choice.
- LevelingPraisedOwners say the full-auto one-click leveling produces a good first layer without manual calibration.
- SpeedMixedReviewers praise the high speed and acceleration, but note that top speeds need tuned profiles to avoid artifacts.
- Nozzle changesMixedThe quick-release nozzles are seen as convenient, though buying extra diameters adds cost and swaps take time.
- Build qualityPraisedOwners describe the frame as sturdy and reliable during fast printing.
- EnclosureCriticisedThe open frame is called a limitation for ABS and other warp-prone or high-temperature materials.
About the Flashforge 3D Printer Adventurer 5M
The Flashforge Adventurer 5M is a 3D printer with full-auto one-click leveling. The leveling system measures nozzle height relative to the build plate and automatically compensates for discrepancies, so no manual calibration is required. Quick-release nozzles in 0.25, 0.4, 0.6, and 0.8 mm diameters allow switching printing modes.
The printer reaches a maximum speed of 600 mm/s and a maximum acceleration of 20,000 mm/s². It has a sturdy design, dual-fan nozzles, and vibration compensation. Filament detection and power recovery support uninterrupted printing. A dual-sided PEI platform and a quick-swap nozzle support maintenance.
- Brand
- Flashforge
- Type
- 3D printer
- Leveling
- Full-auto one-click
- Nozzle system
- Quick-release, quick-swap
- Nozzle diameters
- 0.25 mm, 0.4 mm, 0.6 mm, 0.8 mm
- Max speed
- 600 mm/s
- Max acceleration
- 20,000 mm/s²
- Design
- Sturdy
- Nozzle fans
- Dual-fan
- Vibration compensation
- Yes
- Filament detection
- Yes
- Power recovery
- Yes
- Build plate
- Dual-sided PEI platform
Ask our agent about this product
It checks today's price at every store, compares the alternatives and answers in about a minute.
Questions and answers
- Is the Adventurer 5M good for beginners?
- Yes. Auto-leveling and a largely pre-assembled design keep setup simple, and the stock profiles work well for common filaments. Expect to learn slicing basics to get the most from it.
- How fast does it actually print?
- Flashforge rates it at up to 600 mm/s with 20,000 mm/s² acceleration. Real prints usually run below the maximum, and pushing top speed needs tuned profiles to keep surfaces clean.
- Can I change the nozzle size?
- Yes. Quick-release nozzles come in 0.25, 0.4, 0.6 and 0.8 mm. Smaller sizes suit fine detail, larger ones suit fast, sturdy parts.
- Does it have an enclosure?
- No. It is an open-frame printer, which is fine for PLA and PETG but less suited to ABS or drafts.
- What comes in the box?
- The printer ships with a nozzle installed and the usual setup tools and sample filament. Check the listing for the exact included accessories.
- How does it compare with the Adventurer 3?
- The 5M is faster, has auto-leveling and quick-swap nozzles, and a sturdier frame. The Adventurer 3 is smaller and slower but enclosed.
- Where is the Flashforge 3D Printer Adventurer 5M cheapest?
- At CCC, for $39.03, as of our latest check.














