This is a dual rail humbucker pickup in a single-coil size. It is a replacement part for Strat-style electric guitars and similar guitars. It can go in the neck, middle or bridge position.
The rail design keeps each string within the full magnetic field, even when the string is bent. String spacing at the bridge or nut does not matter, because each string stays aligned with the rail. The pickup uses a ceramic magnet and is fully wax potted for low noise.
Lower resistance suits the neck position, and higher resistance suits the bridge position. Four wires allow coil-tapping, or the pickup can be wired like a traditional 2-wire humbucker. Each pickup comes with 2 screws and 2 springs.
- Type
- Dual rail humbucker, single-coil size
- Magnet
- Ceramic
- Resistance
- 6-7k, 9-10k or 12-13k
- Colors
- Black, White, Cream or Full Black
- Position
- Neck, middle or bridge
- Compatibility
- Strat-style electric guitars and similar guitars
- Noise
- Fully wax potted, low noise
- Wiring
- 4 wires; coil-tap or standard 2-wire humbucker wiring
- Wire colors
- Green and bare: ground. Black: signal (hot). White and red together: coil split (series cable)
- In the box
- 1 pickup, 2 screws, 2 springs