- How does a float switch turn a pump on and off?
- The float rises and falls with the liquid, and its internal contact opens or closes at set angles. Wire it in series with the pump so the pump runs when the float hangs down and stops when it rises.
- Can it switch a mains pump directly?
- Only if the switch's contact rating matches the pump's current, including the start-up surge. Larger pumps need a contactor or relay controlled by the float switch.
- Will it work in dirty or oily water?
- Mechanical floats tolerate dirty water better than optical sensors, but grease and stringy debris can hold the float or clog its travel. Check the body and cable are rated for the liquid.
- Can it be used as a tank high-level alarm?
- Yes. Mount it so the float trips at the alarm level and wire it to a buzzer or light, or to a relay that cuts the fill pump.
- What should I check before buying?
- Match the contact rating to the load, the cable length to the tank depth, and the material to the liquid. Confirm whether you need normally open or normally closed operation.
- Where is the Float switches - Xstorm Plus cheapest?
- At Argendon Crawlspace & commercial dehumidifier, for $24.65, as of our latest check.