
Fluke i400E Digital Clamp Meter Multimeter
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
The Fluke i400E is an AC current clamp, not a standalone meter. It clips around a conductor and feeds a millivolt-per-amp signal through dual banana jacks into a multimeter, logger or oscilloscope. It reads 1 A to 400 A AC with 5 Hz to 20 kHz bandwidth and a 30 mm jaw opening. It suits electricians and technicians who already own a compatible meter and want a Fluke-branded clamp for motors, drives and panel work. It has no display or measurement electronics of its own, so it competes with other current probes on bandwidth and jaw size, not on features.
In stockShips from Hong Kong SAR China · duties may applyReturn policy
The Fluke i400E is an AC current clamp that connects to a multimeter to extend its AC current measurement. It measures 1 A to 400 A AC and sends the reading to the meter as a 1 mV/A AC output signal through its dual banana jacks.
The clamp has a jaw with a 30 mm inside diameter and measures 146 mm x 62 mm x 34 mm. Its frequency range runs from 5 Hz to 20 kHz, and it can withstand a maximum non-destructive current of 600 A. Accuracy is 2.0% ±5 digits from 45 to 65 Hz and 2.5% ±5 digits from 65 to 400 Hz.
It is used with Fluke multimeters and voltage measurement tools that have mV AC capability and accept 19.05 mm sheathed banana plugs, including the Fluke 101, 106, 107, F15B+, F17B+, F18B+, 110, 12E+, 106 and 107. Typical uses include power circuit measurement, malfunction analysis, motor drive measurement on frequency converters, and power electronics equipment measurement. The operating temperature range is 0 to 50 °C.
It checks today's price at every store, compares the alternatives and answers in about a minute.