Can it cut a full 4x8 sheet?

The bed is 48 x 48 inches, so a full 4x8 sheet fits when cut in half. You cannot machine a whole uncut sheet in one pass.

How much assembly is required?

It arrives half-assembled in six boxes. Most owners report finishing setup in about an hour with the included instructions.

Does it need a computer to run?

No. The controller box has a 2.4-inch touchscreen for offline jobs, though you still need a PC to prepare toolpaths.

What spindle does it come with?

It ships with a 400W spindle, which owners find capable for wood, MDF and plastics. Hardwoods and aluminum need light passes.

Is it better than the Vasto XXL?

Yes on speed and rigidity: the CL-4x4 moves up to 5000mm/min, about 2.5 times faster, and adds ball screws and linear rails on all axes.

The machine in six boxes, a T-slot hybrid table, the controller, two 10-piece bit sets, a USB cable and a power cord.

Where is the FoxAlien CL-4x4 CNC Router Machine cheapest?

At FoxAlien, for $2,899.99, as of our latest check.

What do buyers say about the FoxAlien CL-4x4 CNC Router Machine?

Buyers like: Solid, powerful machine; Super easy to assemble; everything fit perfectly and instructions were clear; Assembled in under an hour. Common complaints: Controller not working on arrival; support emails unanswered; Machine stopped multiple times halfway through cuts; router failed to lift and cut a groove.

FoxAlien CL-4x4 CNC Router Machine Price History: Lowest $2,899.99

What reviewers say

Owners call it a solid, powerful machine for the money when it works, and most find assembly quick and the hardware a step above typical hobby routers.

What people mention

Build qualityMixedOwners like the ball screws and linear rails but report stripped screws, scratches and low-quality hardware.
AssemblyPraisedBuyers say everything fit and the instructions were clear, with many finished in under an hour.
ReliabilityCriticisedSeveral machines stopped mid-cut or failed to lift the router, and one Y stepper driver died.
Axis bindingCriticisedZ and X axes arrived binding from burrs and factory adjustment on some units.
ControllerCriticisedA few controllers arrived not working, blocking first use until replaced.

From FoxAlien

Flagship CNC machine in the FoxAlien family, built with industrial-grade hardware
HG-15 linear bearings on every axis; 16mm ball screws on XY and 12mm ball screws on Z
Four Nema23(60-100) closed loop stepper motors with up to 3.5Nm torque
Max moving speed up to 5000mm/min, 2.5 times faster than the Vasto XXL
Working area of 122cm x 122cm x 10cm (48" x 48" x 3.94") fits standard full-sized sheets without cutting
2.4-inch touchscreen on the controller box allows offline control without a PC

Materials: Machine structure material: all metal
Shipping: USA final batch ETD mid November; Europe and UK options; other countries ship from China warehouse with 35-45 days delivery
In the box: 1x CNC router CL-4x4 (half-assembled in 6 boxes), 1x T-slot Hybrid Table, 1x Controller, 2x Set of engraving bits (10pcs/set), 1x USB cable, 1x Power cord

About the FoxAlien CL-4x4 CNC Router Machine

The FoxAlien CL-4x4 is a CNC router and the flagship machine in the FoxAlien CNC family. The structure is all metal. It uses HG-15 linear bearings on every axis, 16mm ball screws on the X and Y axes, and 12mm ball screws on the Z axis.

Four Nema23 (60-100) closed loop stepper motors drive the machine, with torque up to 3.5Nm. Maximum moving speed is up to 5000mm/min. The working area is 122cm x 122cm x 10cm (48" x 48" x 3.94"), which fits standard full-sized sheets without cutting them.

A 2.4-inch touchscreen on the controller box allows offline control without a PC. The router arrives half-assembled in 6 boxes.

Working area: 122cm x 122cm x 10cm (48" x 48" x 3.94") XYZ
Structure: All metal
Linear bearings: HG-15 on every axis
Ball screws: 16mm on XY axes, 12mm on Z axis
Motors: Four Nema23 (60-100) closed loop steppers, up to 3.5Nm torque
Max speed: Up to 5000mm/min
Controller: 2.4-inch touchscreen, offline control without a PC
Assembly: Half-assembled, shipped in 6 boxes
In the box: CNC router CL-4x4, T-slot Hybrid Table, controller, 2 sets of engraving bits (10 pcs per set), USB cable, power cord

What buyers say

Buyers like

Solid, powerful machine
Super easy to assemble; everything fit perfectly and instructions were clear
Assembled in under an hour
Supplied 400W motor is very capable
Good base package: quality ball screws, linear rails and closed loop steppers
Support sent replacement parts

Buyers complain about

Controller not working on arrival; support emails unanswered
Machine stopped multiple times halfway through cuts; router failed to lift and cut a groove
Z axis bound out of the box due to burrs; arrived scratched
X axis out of adjustment and binding from the factory
Right Y axis noisy from new, then Y stepper stopped working (bad stepper driver)
Low-quality hardware; some screws arrived stripped