Is this a genuine Mikuni VM22?

No. It is an aftermarket VM22-pattern carburetor sold under the FVRITO name. It uses Mikuni-style jets and parts, but it is not a Mikuni-branded unit.

Fitment is specific. It suits many 125cc–150cc pit bikes and small dirt bikes with a 26mm intake boot and a matching throttle cable, but measure your boot and cable before ordering.

What jetting does it come with?

It ships with a stock jet set that often runs rich or lean depending on your engine, exhaust and altitude. Plan to buy a small jet kit and tune it.

No written warranty is listed. Check the seller's return window before you install it, since installation usually voids returns.

The carburetor itself, typically with the slide, needle and jets installed. Fuel line, intake boot and cable are usually not included.

Budget carb prices move little, but they tend to dip during seasonal sales and off-season winter months. Compare across stores before buying.

FVRITO Performance VM22 26mm Carburetor

Last price we saw

$16.66at Walmart, last seen Nov 1

Prices change often: ask the agent below to check today's price at every store.

Prices are checked against each store and labelled with when.

Ask our shopping agent

Our take on the FVRITO Performance VM22 26mm Carburetor

The FVRITO Performance VM22 is a 26mm slide carburetor patterned after the Mikuni VM22, a common upgrade or replacement for 125cc to 150cc pit bikes and small dirt bikes. It is a simple, tunable round-slide carb with a manual choke and an adjustable idle and air screw. It ships as a single unit at about 2 lb with no written warranty. It is a low-cost part, and its price sits in the usual budget range for aftermarket VM22 clones rather than at a premium.

Best forPit bike and mini dirt bike owners replacing a worn stock carb