The GARVEE 10-Inch Table Saw is a table saw with a metal stand and a 10-inch, 24-tooth carbide-tipped blade. Its motor is rated at 1800W with a 15 amp current rating and a no-load speed of 5000 RPM. No batteries are required.
A transparent blade guard covers the blade so the cut stays visible while guarding against contact and debris, and the on/off safety switch has overload protection. The saw comes with its stand, the bare tool and attachments, and a push stick for guiding small pieces while keeping hands away from the blade.
The blade bevels from 0 to 45 degrees, cutting 2.91 inches deep at 90 degrees and 2.05 inches at 45 degrees. Miter cuts run from -45 to +45 degrees by adjusting the sliding miter gauge, and the clear rip fence scale shows the distance from the blade to the fence. Dust ports above and below the blade connect to dust extraction.
- Rated Power
- 1800W
- Current Rating
- 15 amps
- No Load Speed
- 5000 RPM
- Blade
- 10 in x 1 in, 24T carbide-tipped
- Max Cutting Depth (90°)
- 2.91 in
- Max Cutting Depth (45°)
- 2.05 in
- Bevel Angle Range
- 0-45°
- Miter Angle Range
- -45° to +45°
- Dimensions
- 36.4 in x 25 in x 31.9 in
- Batteries
- Not required
- Safety
- Transparent blade guard; on/off switch with overload protection
- Dust Extraction
- Ports above and below the blade