- Is 29-gauge steel thick enough for a shed roof?
- Yes for sheds, coops and carports with purlins spaced closely, roughly 24 inches or less. It is too thin for a house roof or wide unsupported spans.
- How much area does the set cover?
- About 178 square feet across 30 panels. Allow extra for overlaps at seams and edges, so plan on less than the full figure on the roof.
- Can I walk on these panels?
- Only with care and weight spread across the ribs, since 29-gauge steel dents under a concentrated load. Use walk boards and step on the ribs, not the flats.
- Do the panels need special fasteners?
- Use screws with sealing washers made for metal roofing, driven into the ribs or as the panel maker directs. Plain nails or unsealed screws will leak and rust at the hole.
- How do I stop cut edges from rusting?
- Touch up cut edges and drilled holes with a galvanized or zinc-rich coating. Bare cut steel is the first place rust starts.
- Can I use these over an existing shingle roof?
- Yes, with purlins run over the old surface, but the short panel length means more seams. Check that framing can carry the added weight.
- Where is the Garvee 29-Gauge Galvanized Steel Ribbed Metal Roofing Panels – 178 Sq Ft (30 Pcs, 43.3" L x 19.7" W) for Gazebos, Carports, Garages & Sheds – Gray cheapest?
- At GARVEE, for $141.99, 22% under what the other stores charge, as of our latest check.
- What do buyers say about the Garvee 29-Gauge Galvanized Steel Ribbed Metal Roofing Panels – 178 Sq Ft (30 Pcs, 43.3" L x 19.7" W) for Gazebos, Carports, Garages & Sheds – Gray?
- Rated 5 out of 5 from 60 ratings.
- Where can I buy the Garvee 29-Gauge Galvanized Steel Ribbed Metal Roofing Panels – 178 Sq Ft (30 Pcs, 43.3" L x 19.7" W) for Gazebos, Carports, Garages & Sheds – Gray?
- 3 stores we checked sell it, including TikTok Shop, Amazon, GARVEE.