What can the GDAE10 engrave?

It is aimed at flat work such as wood, acrylic, plastics and soft metals like aluminum or brass. The two-axis control board means surface engraving rather than deep 3D milling.

How big is the engraving area?

The maximum engraving area is about 65 x 50 cm. That is much larger than typical 3018-style desktop engravers.

Does it come assembled?

It is a kit-style machine that needs assembly and tuning. Expect to square the frame and set belt tension before your first job.

What power does it need?

It runs on a 12V DC supply. You need a suitable power adapter, which is not described in the listing.

Can it cut through thick material?

No. With a two-axis board and an open aluminum frame, it is best for shallow engraving, not through-cuts in thick stock.

Is it a good first CNC machine?

It is a reasonable low-cost entry if you want a big work area and are willing to learn setup. Buyers wanting rigidity or 3D carving should look at a three-axis router instead.

Where is the GDAE10 Engraver cheapest?

At Walmart, for $482.21, as of our latest check.

Eugene Color

GDAE10 Engraver

Best price now

$482.21at WalmartChecked Nov 10

Prices are checked against each store and labelled with when.

Visit Walmart

Eugene Color

GDAE10 Engraver

Best price now

$482.21at WalmartChecked Nov 10

Prices are checked against each store and labelled with when.

Visit Walmart

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Last seen at $482.21 at Walmart on Nov 10.

Our take on the GDAE10 Engraver

The GDAE10 is a desktop CNC engraver built on an aluminum frame with a roughly 65 x 50 cm maximum engraving area. It runs on a 12V DC supply and uses a two-axis CNC control board, so it carves flat work in two dimensions rather than milling in three. It suits hobbyists who want a large-format, low-cost way to engrave wood, plastic and soft metals, and who accept the tinkering that comes with budget CNC kits. Against smaller 3018-class engravers it offers far more working area, but it lacks the rigidity and Z-axis depth of pricier routers.

Best forHobbyists engraving large flat panelsSign and plaque making on wood or acrylicMakers learning CNC on a budgetLight engraving of soft metals

Pros

Large 65 x 50 cm working area for its class
Aluminum frame is sturdier than acrylic-frame kits
Standard 12V DC power, easy to supply
Two-axis CNC board is simple to wire and set up
Open frame gives easy access to large workpieces

Cons

Two-axis control limits it to flat, surface-level engraving
Aluminum extrusion frame flexes under heavier cuts
No bundled spindle specs, so cutting power is modest
Assembly and tuning are required before first use
Open frame means no dust or chip containment

GDAE10 Engraver prices at every store

WalmartNew
In stockSold by VigorMetricReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
$482.21Free shippingChecked Nov 10
Visit Walmart

About the GDAE10 Engraver

The GDAE10 Engraver from Eugene Color is an aluminum engraving machine. It is driven by an advanced CNC 2-axis control board.

The maximum engraving area is 65 x 50 cm. It works on DC 12 V.

Material: Aluminum
Aluminum: 63 cm, 68 cm, 73 cm
Engraving area: 65 x 50 cm (maximum)
Voltage: DC 12 V
Control board: Advanced CNC 2-axis control board

Questions and answers

What can the GDAE10 engrave?: It is aimed at flat work such as wood, acrylic, plastics and soft metals like aluminum or brass. The two-axis control board means surface engraving rather than deep 3D milling.
How big is the engraving area?: The maximum engraving area is about 65 x 50 cm. That is much larger than typical 3018-style desktop engravers.
Does it come assembled?: It is a kit-style machine that needs assembly and tuning. Expect to square the frame and set belt tension before your first job.
What power does it need?: It runs on a 12V DC supply. You need a suitable power adapter, which is not described in the listing.
Can it cut through thick material?: No. With a two-axis board and an open aluminum frame, it is best for shallow engraving, not through-cuts in thick stock.
Is it a good first CNC machine?: It is a reasonable low-cost entry if you want a big work area and are willing to learn setup. Buyers wanting rigidity or 3D carving should look at a three-axis router instead.
Where is the GDAE10 Engraver cheapest?: At Walmart, for $482.21, as of our latest check.