
Gigabyte R263-S30-AAC1 Server System
Best price now
Prices are checked against each store and labelled with when.
Finding cheaper alternatives
Price facts
- Last seen at $2,389.00 at Saitech Inc on Nov 17.
Our take on the Gigabyte R263-S30-AAC1 Server System
The Gigabyte R263-S30-AAC1 is a 2U rack server built on the MS33-DC0 motherboard and a single LGA 4677 socket. It takes 4th and 5th Gen Intel Xeon Scalable chips and Xeon CPU Max Series parts up to 350W, with 16 DDR5 DIMM slots across eight memory channels. That gives it more memory headroom than typical single-socket 1U servers, which usually cap at eight or twelve slots. It suits virtualization hosts, database nodes and memory-heavy workloads where a second CPU would sit idle. Buyers should note it is a single-socket platform, so core counts top out below dual-socket rivals, and the 1300W supply points to a fully loaded chassis.
- 16 DDR5 DIMM slots on a single socket
- Eight-channel memory architecture
- Supports 5th and 4th Gen Xeon Scalable and Xeon Max
- CPU TDP headroom up to 350W
- Dedicated management LAN with NCSI support
- 2U form factor leaves room for drives and airflow
- Single socket limits total core count versus dual-socket servers
- DDR5 RDIMM only; no DDR4 carryover
- High-wattage CPUs and 16 DIMMs demand careful power and cooling planning
- Fewer built-in LAN ports than some competing platforms
Gigabyte R263-S30-AAC1 Server System prices at every store
- Saitech IncNew
In stockReturn policy
$2,389.00Checked 7 h ago
About the Gigabyte R263-S30-AAC1 Server System
The Gigabyte R263-S30-AAC1 is a single-processor server system built on the MS33-DC0 motherboard and the Intel C741 chipset. It takes one Intel Xeon Scalable processor — 4th or 5th Gen, or an Intel Xeon CPU Max Series chip — in an LGA 4677 Socket E, with a TDP of up to 350W.
Sixteen DDR5 DIMM slots run in an 8-channel memory architecture, supporting RDIMMs up to 96GB and 3DS RDIMMs up to 256GB. Up front, four 3.5"/2.5" hot-swappable bays take Gen4 NVMe, SATA or SAS drives and eight more take SATA or SAS drives; SAS drives require a SAS add-in card. Intel SATA RAID 0/1/10/5 is supported.
Expansion comes from two riser cards with one PCIe Gen5 x16 FHHL slot each, two OCP 3.0 slots with PCIe Gen5 x16 bandwidth, and an M.2 slot for 2280 or 22110 cards. Networking is a 1Gb/s LAN port with NCSI plus a separate 10/100/1000 Mbps management LAN, and video comes from an integrated Aspeed AST2600 adapter. Two 1300W 80 PLUS Platinum power supplies run in a 1+1 redundant configuration on 208–230 V AC.
- Model
- R263-S30-AAC1
- Motherboard
- MS33-DC0
- Processor
- 1 x 4th/5th Gen Intel Xeon Scalable or Xeon CPU Max Series, up to 350W TDP
- Socket
- 1 x LGA 4677 Socket E
- Chipset
- Intel C741
- Memory
- 16 x DDR5 DIMM slots, 8-channel architecture
- Memory capacity
- RDIMM up to 96GB, 3DS RDIMM up to 256GB
- Memory speed
- 5th Gen Xeon: up to 5600 MT/s (1DPC), 4400 MT/s (2DPC)
- Memory speed
- 4th Gen Xeon and Xeon Max Series: up to 4800 MT/s (1DPC), 4400 MT/s (2DPC)
- LAN
- 1 x 1Gb/s (Intel I210-AT) with NCSI; 1 x 10/100/1000 Mbps management LAN
- Video
- Aspeed AST2600, 1920x1200 @ 60Hz, 32bpp
- Storage
- 4 x 3.5"/2.5" Gen4 NVMe/SATA/SAS hot-swap bays; 8 x 3.5"/2.5" SATA/SAS hot-swap bays
- SAS support
- Requires a SAS add-in card
- RAID
- Intel SATA RAID 0/1/10/5
- PCIe slots
- Riser CRS201C: 1 x PCIe Gen5 x16 FHHL; Riser CRS201D: 1 x PCIe Gen5 x16 FHHL
- OCP slots
- 2 x OCP 3.0, PCIe Gen5 x16 bandwidth
- M.2
- 1 x M-key, PCIe Gen3 x4, supports 2280/22110 cards
- Internal I/O
- 1 x TPM header, 1 x VROC connector
- Front I/O
- 2 x USB 3.2 Gen1; power, ID, NMI and reset buttons; LAN, storage and system status LEDs
- Rear I/O
- 2 x USB 3.2 Gen1, 1 x Mini-DP, 1 x RJ45, 1 x MLAN, 1 x ID button with LED
- Backplane
- PCIe Gen4 x4, SATA 6Gb/s or SAS 12Gb/s
- TPM
- 1 x TPM header with SPI interface; TPM 2.0 kit CTM010 optional
- Power supply
- 1+1 1300W 80 PLUS Platinum redundant
- Input voltage
- 208–230 V AC
- Protocols
- Web, SNMP, Telnet
Ask our agent about this product
It checks today's price at every store, compares the alternatives and answers in about a minute.
Questions and answers
- Which Xeon generations does it support?
- It takes 5th Gen and 4th Gen Intel Xeon Scalable processors and Intel Xeon CPU Max Series chips in the single LGA 4677 socket, with a TDP ceiling of 350W.
- How much memory can it hold?
- There are 16 DDR5 DIMM slots in an eight-channel layout. RDIMMs go up to 96GB per module and 3DS RDIMMs up to 256GB, so total capacity depends on the modules you fit.
- What memory speed does it run?
- With 5th Gen Xeon it reaches up to 5600 MT/s at one DIMM per channel and 4400 MT/s at two. With 4th Gen Xeon the ceiling is 4800 MT/s at one DIMM per channel.
- Is it a dual-socket server?
- No. It is a single-processor system, so it trades maximum core count for lower cost and simpler cooling than dual-socket machines.
- What networking comes built in?
- The rear has one 1Gb/s Intel I210-AT LAN port with NCSI support plus a separate 1Gb/s management LAN port. Faster networking needs an add-in card.
- What power supply does it use?
- It ships with a 1300W power supply, sized for high-TDP processors and a fully populated memory configuration.
- Where is the Gigabyte R263-S30-AAC1 Server System cheapest?
- At Saitech Inc, for $2,389.00, as of our latest check.
- What do buyers say about the Gigabyte R263-S30-AAC1 Server System?
- Rated 5 out of 5 from 1 ratings.







