It checks today's price at every store, compares the alternatives and answers in about a minute.
In stock
In stock
In stock
Availability unknown
Availability unknown
Availability unknown
Availability unknown
Availability unknown
Availability unknownSold by buildersdiscountmart
Availability unknown
Also available at
Store links may earn us a commission.
Lowest price we've seen: $6.47 on Nov 13 at Walmart Supercenter; $6.98 now. Tracked across 10 stores since Nov 13.
Each roll is 5 ft x 58 ft. Add 10 ft or 20 ft with the length options above.
Sizing
58 ft (standard): coupes, most sedans, Teslas and cars of a similar size.
68 ft (+10 ft): crossover SUVs and large sedans, such as a Ford Bronco, Mercedes GLE, BMW 5 Series or Dodge Challenger.
78 ft (+20 ft): large SUVs and pickups, such as an Escalade or Tahoe.
Order about 10 ft more than you measure, for mistakes and future repairs. Film from a later order can come from a different batch and be a slightly different shade, so order everything at once. Need more to match an earlier roll? Contact us before you order.
The film
Our hybrid film uses polymers normally found in cast film, rolled on calenders, with a German-made adhesive. Installers find it easier to work than calendered film, with a better finish than cast. It isn't directional, so panels don't need to line up.
Before you order
• All sales are final. Not sure about the color? Get a free swatch chip first.
• Leave time to receive and check the roll before your install date. Open the box when it arrives and check the color and length.
• Report any problem within 7 days of delivery, with photos, and don't start installing until we reply.
• We only accept returns or exchanges for our mistakes or an accepted warranty claim.
Storing and installing
• Keep the roll tight and store it flat in its box at 70 to 80 °F, out of the sun and away from dust and humidity. A loose roll lets the liner separate (tunneling), which leaves marks that can't be fixed.
• Use a full roll within 1 year, and partial cuts within 3 months.
• Install at 70 to 80 °F, never in direct sun. Humidity makes the adhesive tackier, so run a dehumidifier if you need to.
• We recommend our Tack Reducer for every vinyl install. Mist it on the middle of a panel and wipe it off after 30 seconds, and the film repositions easily until you squeegee it down. Keep it off edges and recesses, and test it on a scrap first with matte or satin.
• Post-heat every edge and seam to 200 °F with a heat gun, not a torch. With Tack Reducer, post-heat the whole panel, because that's what locks the film in place.
• Every roll comes with an invite to our Discord , where our installers help live. Start with our installation tips .
Care
Ceramic coat the wrap before it sees the sun. UV is what wears a wrap out.
• Hand wash at least every two weeks with a pH-neutral, vinyl-safe shampoo . Never use an automatic car wash.
• Never use carnauba wax, quick detailers with wax, solvents, tire shine or household cleaners. Use a ceramic or graphene detail spray instead.
