15% under what the other stores charge
Compared across 10 stores. Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The GO! Strip Cutter 2 1/4" is an AccuQuilt die for the GO! fabric cutter. It cuts 2 1/4-inch strips, 2 1/4-inch squares and angled diamond shapes in one pass, using guide lines on the board to line up the fabric. It suits quilters who cut lots of binding, sashing or jelly-roll-style strips and want repeatable widths without a rotary ruler. Against a rotary cutter and ruler it trades flexibility for speed and consistency, and it only works with the GO! cutter and the 10 x 24 inch cutting mat.
In stockReturn policy
In stockReturn policy
In stockReturn policy
In stockReturn policy
In stockReturn policy
In stockReturn policy
In stockReturn policy
In stockReturn policy
In stockReturn policy
In stockReturn policy
Owners of AccuQuilt strip cutters value the speed and accuracy on narrow strips, which are the hardest to rotary cut by hand. The common caveat is that the die is only worth it if you already own the cutter and cut strips in volume.
Strip Cutter 2 1/4 inch is a fabric cutting die for AccuQuilt GO! It cuts four 2 1/4" strips across the width of the fabric in one pass. It also cuts squares and diamonds by using the angled guide lines on the die board. Strips can be used for single and double-fold bindings (which finish to 7/8" wide), narrow borders, 1 3/4" finished sashing and string piecing.
The die includes 1/4" seam allowances for easy alignment and piecing. Its blades are 23" long and open at both ends, so fabric can be cut while still folded as it comes off the bolt. Up to 6 layers of scraps or full-length fabric can be cut at once, which gives 12 strips in one pass. It cuts cotton, batiks, flannel, fleece, Cuddle® fabrics and more.
To use it, place the die on the cutter, then the fabric, then the cutting mat on top. Position the fabric so its fold is perpendicular to the cutting blades and rolls through the cutter first. Cut one test shape before cutting many. After cutting, snip any threads left where the blades meet. Some dies have angled blades, so align the fabric to the edge of the shape, not the edge of the die board.
