Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
Gorilla Super Glue Brush & Nozzle is a 12g cyanoacrylate adhesive with two applicators: a precision tip nozzle for controlled drops and a fine bristle brush for spreading glue across a surface. It sets in 10 to 45 seconds and is formulated for impact resistance, which Gorilla calls Impact-Tough. An anti-clog cap with a metal pin keeps the tip sealed between uses. It suits small household repairs, crafts and quick fixes on clean, dry surfaces; against plain single-tip super glues it trades a lower glue volume for two ways to apply it.
In stockShips from the UK · duties may applyReturn policy
Gorilla Super Glue Brush & Nozzle is a 12 g super glue with two ways to apply it: a precision tip nozzle and a fine bristle brush. Both let the user control how much glue goes on. The formula dries in 10 to 45 seconds and is made for increased impact resistance. Gorilla calls it Impact-Tough™.
The bottle has an anti-clog cap with a metal pin inside. The pin helps keep an airtight seal so the glue can be reused.
Before gluing, protect the work area from spills and clean and dry the surfaces. Apply a small amount of glue to one surface, using one drop per 6.5 cm². For the brush, unscrew the full cap and wipe the brush on the inner rim of the bottle to remove excess glue. For the nozzle, unscrew and remove the upper cap. Then press the two surfaces together for 10 to 45 seconds. Set time varies with the amount of glue and the type of surface. Too much glue can cause a delayed or failed bond. Allow 24 hours for a full cure.
