GrandeMARK 2 Die-Cutting Machine

The brand-new AccuCut GrandeMARK 2 Die-Cutting Machine uses commercial steel-rule dies to cut through cardstock, chipboard, fabric and more with ease. As AccuCut’s largest die-cutting machine, the GrandeMARK 2 fits up to giant-size dies with shapes up to 14” x 17”.

The GrandeMARK 2 is a durable hand-operated machine that will last for many years and is the only AccuCut machine recommended for making precise shapes like note cards, bags and boxes. The sides also fold up, giving you more room to work when the machine is not in use.

The only maintenance required for the GrandeMARK 2 is occasional replacement of the Die Tray, Cutting Plastic and Cut & Crease Mats. The steel roller never needs to be replaced because the steel-rule dies cut into Cutting Plastic or Cut & Crease Mats, which will stand up to thousands of cuts.

Step 1

Lay die flat inside tray with FOAM SIDE UP. Place material to be cut on top of die, desired side down. HINT: If shape has straight edges (ie, square), angle die slightly in tray. Lay Cutting Plastic or Cut & Crease Mat on top of material.

Step 2

Push die, tray and plastic or mat until they contact roller. Turn handle in the direction you want die to go. If needed, continue pushing until roller grabs die. Roll die and tray through machine.

Step 3

Remove plastic or mat and die cuts. Repeat process from opposite direction. Replace cutting plastic, mat and tray as needed.

System Maintenance:

The only maintenance required for the GrandeMARK 2 is occasional replacement of the Die Tray, Cutting Plastic and Cut & Crease Mats.

• Always use an AccuCut GrandeMARK Die Tray when cutting with the GrandeMARK 2.

• Depending on usage, the Die Tray must be replaced regularly. Average use requires replacement annually; heavier use will require more frequent replacement.

• You will know the tray needs to be replaced when it warps in the middle, when you hear a popping sound while cutting, or when you are not able to cut as many layers as expected.

• Replace Cutting Plastic and Cut & Crease Mats when you are not able to cut as efficiently as usual.

• No lubrication is necessary; all bearings are sealed. Unlike some other AccuCut machines, the steel roller in the GrandeMARK 2 never needs to be replaced.

GrandeMARK 2 Machine Tips:

• Pl