Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The Grizzly G0602 is a 10-inch by 22-inch benchtop metal lathe built for garage and small-shop work. A 1 HP 110V motor drives six spindle speeds from 150 to 2400 RPM, and the package includes a 5-inch 3-jaw chuck, a 6-1/2-inch 4-jaw chuck, an 8-inch faceplate and a 4-way tool post. It cuts right-hand threads only, which separates it from lathes that also do left-hand and metric threading. Owners rate it well for its capacity and included tooling at its size, while the common complaints are the limited threading and the setup and tuning a new import lathe needs.
Availability unknown
Also available at
Lowest price we've seen: $2,709.99 on Nov 12 at Tractor Supply Company. Tracked across 1 store since Nov 12.
Buyers rate the G0602 highly for its size, included chucks and smooth operation once set up. Many note it needs tuning and cleanup when new, and the right-hand-only threading is a recurring limitation.
The Grizzly G0602 is a 10" x 22" benchtop metal lathe sized for a garage or workshop. It has a 1 HP, 110V single-phase motor that drives the spindle through six speeds from 150 to 2400 RPM. The spindle has a 25mm bore and a threaded 1-3/4" x 8 TPI nose with an MT#4 taper. The tailstock has an MT#3 taper.
The bed has hardened, precision-ground V-ways. The lathe has a full carriage and apron assembly, a thread dial, inch/metric dials, a spindle reversing switch and an emergency stop button. The gearbox is enclosed and oil-bathed, and the tailstock locks quickly. A chip tray and backsplash guard are included. This lathe cuts right-hand threads only.
It comes with a 5" 3-jaw chuck, a 6-1/2" 4-jaw chuck, an 8" faceplate, a 4-way tool post, change gears, and a follow rest and steady rest.
