Prices are checked against each store and labelled with when. Store links may earn us a commission. Price via Klarna.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The Grizzly T32719 is a 36-inch benchtop pan and box brake for bending sheet metal into pans, boxes and channels. Its segmented fingers (twelve fingers in 2, 3 and 4 inch widths) let you set up box sides and clear already-bent flanges, and the brake swings through 0 to 135 degrees. It handles 18-gauge mild steel across the full width, 16-gauge at half width, 16-gauge aluminum and 20-gauge stainless, with a 2-inch maximum box side height. It suits fabricators and hobbyists who want box and pan capacity without a floor-standing machine; compared with lighter 30-inch brakes it bends wider stock and thicker half-width material, but it is a benchtop unit, so very thick plate and deep boxes are out of reach.
In stock
Store links may earn us a commission. Price via Klarna.
Lowest price we've seen: $987.55 on Nov 13 at JB Tools. Tracked across 1 store since Nov 13.
The Grizzly T32719 is a benchtop pan and box brake with a 36" maximum working width. It bends sheet metal into pans, boxes and other formed shapes, with a brake range of 0–135°.
It handles 18-gauge material at full width and 16-gauge at half width. Aluminum capacity is 16-gauge and stainless steel capacity is 20-gauge. The maximum pan or box side height is 2", and the minimum reverse bend is 5/16".
The brake has 12 fingers in 2", 3" and 4" widths. It sits on a benchtop with a footprint of 40-1/2" x 13".
