Prices are checked against each store and labelled with when.
The JNPOG Ground Loop Noise Isolator is a passive 3.5 mm inline filter that removes the buzz, hum and hiss caused by ground loops between a source and an amplifier. It needs no batteries or power: you plug it between two standard 3.5 mm jacks and it breaks the ground path that carries the noise. The aluminum housing shields it from outside interference, and its small size suits car aux setups, desktop PCs and home stereo chains. It is a fix for a specific problem rather than an upgrade, so it only helps when the hum comes from a ground loop and not from a bad cable or a failing component.
In stockSold by BOKYANReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
The Ground Loop Noise Isolator is a passive audio filter that connects through standard 3.5 mm audio jacks. It is made to clear up electrical buzzing, hum and hiss caused by ground loops, and it needs no batteries or external power.
The housing is aluminum alloy, which shields the signal from outside electromagnetic noise. It measures 7.87 x 5.12 x 3.15 inches (20 x 13 x 8 cm) and weighs 7.05 oz (200 g).
It sits between an in-car auxiliary receiver, home theater amplifier, audio mixer or desktop PC and the rest of the audio chain. The frequency response is ultra-wide and harmonic distortion is near zero.
It checks today's price at every store, compares the alternatives and answers in about a minute.