The GRS 12 in 1 Interface Board is a drop-in adapter that turns an Arcade1Up 12-in-1 cabinet's stock spinner and trackball into USB devices a PC or Raspberry Pi can read. It works with the GRS Spinner V2 and Trackball V2 as well as the original Arcade1Up stock parts, and it needs no soldering or wire cutting. It suits Arcade1Up owners who want to use their cabinet's controls on a computer or a different emulation setup. The catch is that it is a converter, not a controller: a USB cable is not included, and it does not work with the newer Arcade1Up upgrade spinner or with counterfeit GRS spinners.
In stockReturn policy
Owners rate it highly, with 4.9 out of 5 from 19 ratings. The praise centers on the solder-free install and getting stock Arcade1Up controls working over USB.
The GRS 12 in 1 interface board makes a spinner and trackball USB compatible. It works with the GRS Spinner V2 and Trackball V2, and with the original stock spinner and trackball from the Arcade1Up 12 in 1 cabinet. It replaces the stock interface board, so the controls can be used with a PC or other arcade emulator setup.
Installation needs no soldering and no wire cutting. You connect the wires to the board, and the tools needed are included. Once connected, the trackball and spinner work like the original setup, and the spinner and trackball can be used together in games such as Tempest, Missile Command and Major Havoc.
It only works with the original GRS spinner, not with counterfeit versions. It is not compatible with the new Arcade1Up upgrade spinner. A USB cable is not included.