These are full-extension, side-mount ball-bearing drawer slides with a soft-close action. They have a zinc finish and are sold as one pair.
A trigger disconnect lets you remove the drawer from the slides. Front locking devices are not required. Side mounting does not require a particular drawer-wall thickness. Each side needs 1/2 inch of clearance.
The slides can mount directly to suitable cabinet sides or blocking. For face-frame rear mounting, Hardware Resources 303FUSFT3 self-adjusting rear brackets are available separately.
- Nominal length
- 22 inches
- Cabinet member
- 550 mm long, per the manufacturer drawing
- Profile height
- Approximately 45 mm
- Load rating
- 100 lb per pair
- Extension
- Full extension
- Action
- Soft-close, with trigger disconnect for drawer removal
- Mounting
- Side mount
- Side clearance
- 1/2 inch per side
- Finish
- Zinc
- Screws
- 6.3 mm Euro screws or #8 x 7/16-inch truss-head screws
- Quantity
- One slide pair
- Optional brackets
- Hardware Resources 303FUSFT3 self-adjusting rear brackets for face-frame rear mounting, sold separately