This is a headless electric guitar kit with an HSS pickup layout. It has a mahogany body with a thin quilted maple veneer top, a maple neck with an ebonized wood fretboard, and a headless tremolo bridge. The fretboard has 24 frets and white pearloid trapezoid inlays.
The body is unfinished and every cavity, hole and channel is pre-routed, so no woodworking or routing is needed. You sand, finish, wire and assemble it. The electronics are wired by soldering. The neck is bolt-on, so there is no gluing or clamping.
The quilted maple veneer is about 0.5 mm thick and is easy to sand through, so go lightly at the edges. The tremolo bridge needs careful setup for tuning stability. The build difficulty is rated Intermediate (5/10).
- Type
- Headless electric guitar kit, full size, 6 strings
- Dexterity
- Right-handed
- Build difficulty
- Intermediate (5/10)
- Body
- Solid mahogany (2-3 pieces), double cutaway, no binding
- Top
- Quilted maple veneer, about 0.5 mm thick
- Neck
- Maple, C-shaped profile, bolt-on joint, no binding
- Truss rod
- Two-way, adjustable
- Scale length
- 648 mm / 25.5"
- Fretboard
- Ebonized wood, 14" / 356 mm radius
- Frets
- 24, stainless steel, medium jumbo (2.7 x 0.9 mm / 0.106 x 0.036")
- Inlays
- White pearloid, trapezoid
- Headstock
- None (headless), string locking nut
- Pickups
- 1 humbucker (bridge), 2 single coils (neck and middle), ceramic magnets
- Controls
- 1 volume, 1 tone, 5-way selector
- Wiring
- DIY, soldering required
- Output jack
- Side jack
- Bridge
- Headless tremolo with bridge-mounted tuners
- Pickguard
- None
- Hardware
- Black knobs and black plastic cavity covers
- Strings
- Steel, ball ends
- In the box
- Unfinished routed body; neck with fretboard and frets installed; black headless bridge with six thumbwheel tuners; 3 black covered pickups; 5-way switch, 2 potentiometers and wiring loom; output jack
- Tools needed
- Assembly: Phillips screwdriver, Allen wrench set. Wiring: soldering iron, solder, wire cutters. Finishing: 220-600 grit sandpaper, primer, paint or stain, clear coat. Setup: string winder, guitar tune