Does it come with a blade?

No. The box holds one stationary ring saw unit only. You fit your own diamond ring blade.

Up to 270 mm, enough for deep conduit and pipe channels in one or two passes.

Do I need water to run it?

Yes. A water-cooled linkage pump suppresses heat, so plan for a water feed and slurry containment.

Is it a handheld tool?

It is sold as a stationary unit. Expect to set it up against the wall rather than carry it freely.

What power supply does it need?

It runs on a 50 Hz mains supply and draws 8800 W, so check your circuit and breaker capacity before use.

Contractors and crews cutting electrical, plumbing and HVAC channels in concrete, block or stone. Light renovation work is better served by a smaller chaser.

Where is the Heavy Duty Ring Saw Wall Cutting Machine cheapest?

At VXB.com Bearings, for $2,222.95, as of our latest check.

Heavy Duty Ring Saw Wall Cutting Machine

Best price now

$2,222.95at VXB.com BearingsChecked Nov 1

Prices are checked against each store and labelled with when.

Visit VXB.com Bearings

Heavy Duty Ring Saw Wall Cutting Machine

Best price now

$2,222.95at VXB.com BearingsChecked Nov 1

Prices are checked against each store and labelled with when.

Visit VXB.com Bearings

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Last seen at $2,222.95 at VXB.com Bearings on Nov 1.

Our take on the Heavy Duty Ring Saw Wall Cutting Machine

This is a corded wall chaser built to cut utility channels into concrete, masonry block and stone. Its 8800 W motor drives a ring blade at 3000 rpm to a maximum 270 mm depth, and a water-cooled linkage pump keeps the cut cool through long shifts. A dust canopy and electronic soft start round out the package. It is a stationary, blade-less unit, so you supply the diamond blade. Against lighter 1500–2500 W wall chasers it cuts deeper and faster, but it is heavier, needs a water supply and is aimed at contractors rather than occasional DIY work.

Best forContractors cutting conduit and plumbing channelsDeep slotting in concrete and masonry blockLong renovation shifts needing sustained cuttingUsers who already own diamond ring blades

Pros

High 8800 W input holds speed through dense concrete
270 mm maximum depth handles deep conduit runs
3000 rpm ring blade cuts slots quickly
Water-cooled pump limits heat over extended use
Dust canopy contains slurry and debris
Soft start protects the motor and gearing

Cons

Blade not included, so add its cost and fit
Heavy stationary unit, not easy to carry up ladders
Needs a water supply and slurry cleanup
Corded mains power limits reach on site

Heavy Duty Ring Saw Wall Cutting Machine prices at every store

VXB.com BearingsNew
Availability unknown
$2,222.95Checked Nov 1
Visit VXB.com Bearings

Heavy Duty Ring Saw Wall Cutting Machine price history

Lowest price we've seen: $2,222.95 on Nov 1 at VXB.com Bearings. Tracked across 1 store since Nov 1.

From VXB.com Bearings

8800 watt motor for dense structural materials
270 mm maximum cutting depth
3000 rpm rotary speed for rapid slot creation
Water cooled linkage pump suppresses heat buildup
Protective dust canopy contains debris during grinding
Electronic soft start mechanism protects internal components

Returns: Free, easy and hassle-free returns on every order
Shipping: Orders take 5-10 business days to process before shipping
In the box: One complete stationary ring saw unit (blade not included)

About the Heavy Duty Ring Saw Wall Cutting Machine

This heavy duty ring saw is a wall cutting machine for slotting concrete, masonry blocks and stone veneers. It is used to cut channels for electrical conduits, plumbing lines and HVAC runs in residential and commercial renovation work.

An 8800 watt motor drives the blade at 3000 rpm, with a maximum cutting depth of 270 mm. A water-cooled linkage pump limits heat buildup during long cuts, and a dust canopy contains debris while grinding. An electronic soft start protects the internal components.

The unit ships without a blade. You attach your own diamond blade.

Power: 8800 W
Rotation speed: 3000 rpm
Cutting depth: 270 mm maximum
Frequency: 50 Hz
Cooling: Water-cooled linkage pump
Dust control: Protective dust canopy
Start: Electronic soft start
Suitable materials: Concrete slabs, masonry blocks, stone veneers
In the box: 1 ring saw unit (blade not included)

Questions and answers

Does it come with a blade?: No. The box holds one stationary ring saw unit only. You fit your own diamond ring blade.
How deep can it cut?: Up to 270 mm, enough for deep conduit and pipe channels in one or two passes.
Do I need water to run it?: Yes. A water-cooled linkage pump suppresses heat, so plan for a water feed and slurry containment.
Is it a handheld tool?: It is sold as a stationary unit. Expect to set it up against the wall rather than carry it freely.
What power supply does it need?: It runs on a 50 Hz mains supply and draws 8800 W, so check your circuit and breaker capacity before use.
Who is it for?: Contractors and crews cutting electrical, plumbing and HVAC channels in concrete, block or stone. Light renovation work is better served by a smaller chaser.
Where is the Heavy Duty Ring Saw Wall Cutting Machine cheapest?: At VXB.com Bearings, for $2,222.95, as of our latest check.