
HH-HEXA Alnico 5 Uncovered Adjustable Hexagonal Poles Humbucker Neck Bridge Pickups Set 7.5K/16.6K for Electric Guitar
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
A matched neck and bridge humbucker pair with uncovered bobbins, Alnico 5 magnets and two rows of adjustable hex pole pieces. The neck measures 7.5K and the bridge 16.6K, a wide spread that gives a clear, open neck tone and a hot, compressed bridge for rock and metal. The dual hex poles let you dial string balance more precisely than a single row of slugs. It is a budget-minded upgrade for players chasing modern high-gain tones, though the very hot bridge and the included screws that may not fit are the main trade-offs against more expensive boutique sets.
In stockReturn policy
This is a set of two uncovered humbucker pickups for an electric guitar, one for the neck position and one for the bridge. Both use Alnico 5 magnets and have two rows of adjustable hexagonal pole pieces.
The neck pickup is rated at 7.5K resistance and 3.8H inductance; the bridge pickup at 16.6K and 8.0H. Pole piece spacing is 50 mm (1-31/32 in) at the neck and 52 mm (2-3/64 in) at the bridge. The mounting screw holes are spaced 78 mm (3-5/64 in) apart.
Each pickup has a nickel silver baseplate, a PC bobbin and 4P shielded wiring. Resistance tolerance is 0.5K for a single coil and 1K for a humbucker; the resistance reading shifts with temperature and humidity, running higher in hot, dry weather and lower in cold, wet weather.
It checks today's price at every store, compares the alternatives and answers in about a minute.




