Free shipping on everything10% off your first orderNo account needed · Buy 2, save 10% · 3+, save 15%

Hot Air Rework Station with Gun
This one just sold out
It was sold and shipped by Deal.ai. The store has more like it, with free shipping on everything.
See similar productsAsk our agent about this product
It checks today's price at every store, compares the alternatives and answers in about a minute.
Our take on the Hot Air Rework Station with Gun
A 700W hot air rework station for soldering and desoldering surface-mount parts. It pairs a compact base unit with a handheld gun on a side cradle, with knobs for temperature and airflow. The brushless fan delivers soft, quiet air (under 45dB) at up to 120 liters/min, and the ceramic heating core reaches working heat quickly. It suits hobbyists and repair techs doing board-level work; it is a basic single-function unit, so it lacks the digital display, sleep mode and program presets that pricier stations offer.
- 700W ceramic heating core heats up fast
- Quiet brushless fan rated under 45dB
- Adjustable temperature and airflow knobs
- Compact base with side-mounted gun cradle
- Simple analog controls, no menus
About the Hot Air Rework Station with Gun
This is a hot air rework station made up of a rectangular base unit and a handheld heat gun, both in black. The front of the base has a power switch and separate knobs for air and temperature, and a cradle on the side holds the gun when it is not in use. The gun has a tapered nozzle and a cord that connects it to the base.
The housing is made of a high-grade ferroalloy, and the heating core has a ceramic skeleton. The air outlet and the nozzle are stainless steel. A brushless fan inside the base pushes the air out as a soft spiral flow.
Airflow reaches up to 120 liters per minute, and the noise level stays below 45 dB.
- Type
- Hot air rework station
- Power
- 700 W
- Airflow
- Up to 120 liters/min
- Fan
- Brushless, soft spiral air
- Noise
- Less than 45 dB
- Heating core
- Ceramic skeleton
- Shell material
- High-grade ferroalloy
- Outlet and nozzle
- Stainless steel
- Controls
- Power switch, air and temperature knobs
- Gun cradle
- Side-mounted
- Handle length
- 120 cm including cord
- Dimensions
- 13 cm high x 10 cm wide x 14.5 cm long
- Weight
- 1.86 kg
Questions and answers
- What temperature range does it cover?
- The dial covers roughly 100°C to 450°C. The listing text gives both 480°C and 450°C as the top end, so treat 450°C as the working ceiling.
- Is it loud?
- The brushless fan is rated under 45dB, which is quiet for a rework station. Most of what you hear is airflow, not motor noise.
- What comes in the box?
- The packing list is the hot air gun and its handle assembly. The base unit and gun cradle are part of the station itself.
- Can it handle phone and laptop board work?
- Yes for surface-mount rework, with the airflow turned down to avoid blowing small parts away. Very large boards or heavy ground planes may need more heat than 700W delivers.
- What is not covered by the warranty?
- Heating cores and other consumable or wear parts, damage from improper use or unauthorized disassembly, and damage from accidents are excluded.






