
Price facts
- Lowest price today: $79.99 at ZZPerformance (checked Nov 18, 2026).

The PROLINK+ is an input expansion cable for HP Tuners MPVI2+, MPVI3 and MPVI4 interfaces. It adds two 0-5V analog inputs and one 500kbps CAN bus input, sampled at 100Hz, so you can log a wideband, MAP or boost sensor alongside CAN data in one datalog. It suits tuners and DIY dataloggers who need more channels than the interface alone provides. MPVI3 and MPVI4 owners plug it in and go; MPVI2+ owners need the Pro Feature Set first. It is a single-purpose accessory, not a logger on its own, so its value depends on how many extra channels you actually need.
In stockReturn policy
Owners of HP Tuners interfaces treat the PROLINK+ as the standard way to add analog channels to their datalogs. They report it works as described once the interface supports it, and most complaints come from MPVI2+ buyers who did not realize the Pro Feature Set was required.
The cable connects to an HP Tuners interface to add extra signal inputs. It accepts two analog signals and one CAN bus signal at the same time. It is compatible with MPVI2+, MPVI3, and MPVI4 interfaces.
The two analog inputs are dedicated 0–5V inputs. The CAN bus input runs at 500 kbps, and the cable samples at 100 Hz. It uses an M8 connector to a 5-wire harness. For MPVI2+ interfaces, the Pro Feature Set is required to use the cable.
It checks today's price at every store, compares the alternatives and answers in about a minute.