
Price facts
- Lowest price today: $79.99 at More Power Tuning (checked Nov 18, 2026).

The PROLINK+ is an add-on cable for HP Tuners MPVI2+, MPVI3 and MPVI4 interfaces. It adds two 0-5 V analog inputs and one 500 kbps CAN-bus input so you can log wideband AFR, MAP, boost pressure or custom CAN channels alongside standard OBD-II data. It suits DIY tuners and shops already using an MPVI interface who need more than factory sensors provide. The standard MPVI cable logs OBD-II only, so the PROLINK+ is the step up for anyone tuning forced induction or running an external wideband.
In stockReturn policy
Owners of MPVI interfaces treat the PROLINK+ as the standard way to log external sensors. They value the plug-in integration with VCM Suite and the extra analog and CAN channels. Complaints center on the limited input count and the need to already own an MPVI.
The HP Tuners PROLINK+ is an add-on cable for MPVI2+, MPVI3, and MPVI4 interfaces. It brings external sensor readings and CAN-bus data into the interface for data logging. The cable has two 0-5 V analog inputs and one CAN-bus input.
It uses an M8 4-pin connector and a 5-wire harness. The wires are black for ground, red for analog1, blue for analog2, orange for CAN high, and yellow for CAN low. Analog inputs sample at up to 100 Hz, and the CAN-bus input reads high-speed CAN data at 500 kbps.
In VCM Scanner, channels are added through External Inputs → MPVI2/MPVI3/MPVI4 → Pro Link/Pro Link+ and transformed into usable sensor data. An MPVI2+ interface requires the Pro Feature Set.
It checks today's price at every store, compares the alternatives and answers in about a minute.