
Hstar D43-01Q 1/43 4WD Alloy Drift RC Car
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The Hstar D43-01Q is a 1/43-scale four-wheel-drive drift RC car with an alloy shell over an ABS and nylon chassis. It stands out for full proportional throttle and steering, an adjustable gyro, dual-speed mode, remote-controlled LED lights and Type-C charging, plus both drift and racing tires in the box. That puts it above toy-grade mini drifters that steer only left or right, and near hobby-grade micro cars on control feel. It suits desk and tabletop drifting on smooth floors rather than outdoor running.
In stockShips from Hong Kong SAR China · duties may applyReturn policy
The Hstar D43-01Q is a 1/43 scale RC drift car built for indoor tabletop driving. It has an alloy shell on an ABS and nylon chassis with metal bearings, and it measures 11.7 × 5 × 3.5 cm. With the battery installed it weighs about 100 g.
An N20 iron-core motor drives all four wheels through a 4WD drivetrain with independent suspension. Throttle and steering are full proportional through a 3-wire 2g steering servo, and an adjustable gyro helps hold a steady drift angle on smooth floors. A switch on the transmitter selects high or low speed.
The 2.4GHz four-channel transmitter controls the car from 35 m or more and also switches the LED headlights and taillights on and off. The built-in 3.7V 300mAh Li-ion battery charges over USB Type-C in about 50–60 minutes and runs for roughly 25–35 minutes depending on mode and surface; the indicator shows red while charging. Drift tires and racing tires are both included and can be swapped.