- Is this strip dot-free like other COB strips?
- Yes. The COB emitter is continuous, so you get a smooth line of light with no visible dots, unlike standard SMD strips.
- What driver does it need?
- It needs a separate constant-voltage driver matching the strip's voltage (12V or 24V, check the label) with enough current for the full length. The driver and connectors are not included.
- Can I cut it to length?
- Yes, at the marked cut points. Cut only on those marks, and expect the remaining piece to need its own power feed.
- Will it fit in a standard aluminum channel?
- The 5 mm board fits narrow channels, but check the channel's inner width and depth. A tight channel helps pull heat away from the strip.
- How long a run can I power from one end?
- Keep single-end runs short, roughly a few meters, or feed power from both ends. Long runs on a narrow strip show noticeable dimming at the far end.
- Is it dimmable?
- The strip itself can be dimmed with a suitable PWM dimmer or dimmable driver, but no dimmer or remote is included.
- Where is the Itopfox COB LED Strip Light 5 mm 16.4 Ft cheapest?
- At Lowe's, for $94.98, as of our latest check.