
JAKEMY JM-Y10 Pro Ultrasonic Cutter
Best price now
Prices are checked against each store and labelled with when.
Finding cheaper alternatives
Price facts
- Last seen at $465.83 at SAMMY on Nov 17.

Prices are checked against each store and labelled with when.
The JAKEMY JM-Y10 Pro is a handheld 40 kHz ultrasonic cutter and polisher for makers, modelers and electronics hobbyists. A 35W titanium transducer drives the blade so it slices foam, leather, plastic, acrylic, carbon fiber and PCB stock with little dust or fraying, and a polishing stick attachment handles sanding and finishing. It cuts thin stock only: up to 6 mm foam, 5 mm leather, 4 mm ABS or acrylic and 3 mm plywood. Against rotary tools and hobby knives it trades raw power for clean, low-dust edges on soft and layered materials, but it is not for metal, glass, loose cloth or soft silicone.
In stockReturn policy
Meet the JAKEMY JM-Y10 Pro Ultrasonic Cutting Knife — a professional-grade, handheld ultrasonic cutter and polisher built for makers, hobbyists, electronics enthusiasts, and DIY crafters who demand clean, precise results. Powered by a high-frequency titanium alloy transducer and piezoelectric ceramics operating at 40 kHz , this tool delivers effortless, fraying-free cuts through an impressive range of materials.
Made in Mainland China.
Key Features & Benefits
Ultrasonic Cutting & Polishing in One Tool
High-Power Ultrasonic Vibration (35W): The titanium alloy transducer and piezoelectric ceramics drive high-frequency blade vibration for clean, precise cuts with minimal dust or fraying.
Dual-Function Design: Swap the ultrasonic cutting blade for the included polishing stick attachment to handle sanding and finishing tasks — all from one compact tool.
Wide Material Compatibility: Cuts cardboard, wood, plastic, acrylic, leather, carbon fiber, PCB boards, gypsum, EVA foam, 3D resin, and more. Not recommended for metal, glass, loose cloth/fiber, or soft silicone.
Maximum Cutting Thickness Guide (Standard Blade)
• Foam / Cardboard: up to 6 mm
• Genuine Leather: up to 5 mm
• ABS Plastic / Acrylic: up to 4 mm
• Plywood / Wood: up to 3 mm
• PP Plastic: up to 2 mm
• Carbon Fiber Board: up to 1 mm
*Actual cutting depth may vary depending on material density, structure, and operating technique. Always cut from top to bottom.
Smart OLED Display & 4 Operating Modes
OLED Screen: Displays current power level, operating mode, and thermal protection alerts at a glance — no guesswork.
Auto Mode (Blue Indicator): Continuous hands-free operation for longer cuts.
Manual / Inching Mode (Green Indicator): Precision-controlled cutting activated only while holding the trigger.
Adjustable Vibration Levels: Dial in the right power level for each material with a single mode button press.
Overheat Protection & Cooling System
Thermal Protection: The OLED flashes cyan or shows a full time bar when the tool reaches its thermal limit — simply pause and allow natural cooling before resuming.
Integrated Cooling Vents: Built-in ventilation maintains consistent performance during extended sessions.
Important: Do not place the tool on flammable surfaces when overheated.
It checks today's price at every store, compares the alternatives and answers in about a minute.



