StoreDeal.ai store
Shop
  • Deals
  • Deal checker
  • Black Friday
  • Buying guides
  • Brands
  • Stores
Travel
  • Flight deals
  • Hotel deals
Company
  • Research
  • Press
  • Use in AI assistants
  • Contact
  • deal.ai apps
Black Friday 2026
  • Walmart
  • Best Buy
  • Target
  • TVs
  • Laptops
  • Headphones
  • Apple
  • Gaming
  • Vacuums
  • Kitchen
  • Toys
  • Smartwatches
  • Tablets
  • Furniture
  • Mattresses
© Deal.ai Inc.·2222 Ponce de Leon Blvd, Miami, FL 33134·support@deal.ai
TermsPrivacy
Deal.ai › JAYO
JAYO
JAYO PLA Matte 1.75mm 1.1kg

JAYO PLA Matte 1.75mm 1.1kg

Best price now

$22.99at The 3d MakerPlaceChecked 6 h ago

Prices are checked against each store and labelled with when.

Finding cheaper alternatives

Checking the Deal.ai store…

Price facts

  • Lowest price today: $22.99 at The 3d MakerPlace (checked Nov 20, 2026).
$22.99at The 3d MakerPlaceChecked 6 h ago
Visit The 3d MakerPlace

Our take on the JAYO PLA Matte 1.75mm 1.1kg

JAYO PLA Matte is a 1.75mm PLA filament sold on a 1.1 kg spool with a matte finish that hides layer lines better than standard glossy PLA. It is wound mechanically and checked by hand, dried for 24 hours and vacuum sealed with desiccant, and held to a diameter tolerance of +/- 0.02mm. That puts it alongside other budget matte PLA spools: it prints like ordinary PLA on most FDM machines, but the matte surface scatters light and gives prints a softer, less plastic look. It suits hobbyists printing display pieces, props and parts where surface finish matters more than strength.

Best forHobbyists printing display models and propsOwners of standard FDM printers with 1.75mm hotendsMakers who want a matte surface without post-processingBuyers stocking a general-purpose PLA spool
Pros
  • Matte finish hides layer lines and glare
  • Tight +/- 0.02mm diameter tolerance
  • Dried 24 hours and vacuum sealed with desiccant
  • Neatly wound spool feeds without tangling
  • Prints with standard PLA settings on most FDM printers
Cons
  • Matte PLA is usually less tough than standard PLA
  • 1.1 kg spool is smaller than the common 1 kg-plus refills some rivals sell
  • Color can look flatter and duller than glossy PLA
  • Matte additives can wear brass nozzles faster over long use

JAYO PLA Matte 1.75mm 1.1kg prices at every store

  • The 3d MakerPlaceNew

    In stockReturn policy

    $22.99Checked 6 h ago
    Visit The 3d MakerPlace

About the JAYO PLA Matte 1.75mm 1.1kg

JAYO PLA Matte is a 1.75 mm PLA filament for 3D printing. The filament weighs 1.1 kg and is compatible with FDM 3D printers and 3D pens.

The filament is mechanically wound and manually inspected to keep the line neat and reduce tangling. It is dried for 24 hours before packaging and vacuum sealed with desiccant in a transparent bag. The diameter is held to ±0.02 mm.

It prints at 200–230 °C, with a hot bed at 60–80 °C and a print speed of 40–80 mm/s. The melt index is 7–9 g/10 min.

Material
PLA matte
Filament diameter
1.75 mm
Dimensional accuracy
±0.02 mm
Filament weight
1.1 kg
Print temperature
200–230 °C
Hot bed temperature
60–80 °C
Print speed
40–80 mm/s
Melt index
7–9 g/10 min
Compatibility
FDM 3D printers and 3D pens
Packaging
Vacuum sealed with desiccant
Drying
24 hours before packaging
Winding
Mechanically wound and manually inspected

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Enter to send, Shift+Enter for a new line

Questions and answers

Does matte PLA print differently from regular PLA?
It prints at similar temperatures to standard PLA, roughly 190-220C, on a heated bed around 50-60C. The matte additive makes the surface scatter light, so layer lines show less. It tends to be slightly more brittle than plain PLA.
Will the 1.1 kg spool fit my printer?
The spool is a standard 1.75mm format and fits most printers with a spool holder sized for 1 kg rolls. Check your holder's width and the spool diameter if you use a tight enclosure or a rear-mounted holder.
Is the filament dry out of the bag?
JAYO dries the filament for 24 hours and vacuum seals it with desiccant, so it should print without popping or bubbles. Once opened, store it sealed with desiccant, since PLA absorbs moisture over time.
What tolerance does JAYO quote for the diameter?
JAYO states +/- 0.02mm on the 1.75mm diameter, measured during production. That is tight enough for most 0.4mm nozzles and reduces jams from diameter swings.
Is matte PLA good for functional parts?
It is fine for low-stress parts, brackets and housings, but plain PLA or PETG is tougher for parts that flex or take impact. Use matte PLA where appearance matters most.
Does it clog easily?
JAYO claims no clogging and no bubbles thanks to the drying and vacuum sealing. Keep the nozzle clean and the filament dry, and it should feed smoothly through standard hotends.
Where is the JAYO PLA Matte 1.75mm 1.1kg cheapest?
At The 3d MakerPlace, for $22.99, as of our latest check.

More from JAYO

  • J
    JAYO High Speed Matte PETG 3D Printing Filament 1.1KG
    JAYO High Speed Matte PETG 3D Printing Filament 1.1KG
  • J
    JAYO PLA+
    JAYO PLA+
  • J
    JAYO High Speed Matte PETG 1.1KG 3D Printing Filament
    JAYO High Speed Matte PETG 1.1KG 3D Printing Filament
All JAYO deals and products →

More 3d printer filament

  • P
    Panchroma Luminous PLA
    Panchroma Luminous PLA
  • P
    PLA+ Filament - 1.75mm±0.03mm (1kg)
    PLA+ Filament - 1.75mm±0.03mm (1kg)
M
Matte PLA Filament (RFID) - 1kg
Matte PLA Filament (RFID) - 1kg
  • P
    Polymaker HT-PLA - 1.75mm (1 kg / 2.2 lbs)
    Polymaker HT-PLA - 1.75mm (1 kg / 2.2 lbs)
  • P
    Panchroma PLA
    Panchroma PLA
  • T
    Tough PLA 3D Printer Filament 1 kg
    Tough PLA 3D Printer Filament 1 kg
  • S
    Steel-filled Metal Composite PLA
    Steel-filled Metal Composite PLA
  • P
    PLA Metal
    PLA Metal