
JET JPJ-12BHH 12 Inch Planer Jointer 3HP Helical Head 230V with 42-Insert Carbide Cutterhead
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
The JET JPJ-12BHH is a 12-inch combination jointer and planer driven by a 3HP, 230V motor. Its helical cutterhead carries 42 four-sided carbide inserts, and the parallelogram table design keeps the bed close to the cutterhead for a clean finish and fine depth-of-cut control. The fence stays mounted when switching between jointing and planing, which saves setup time versus two separate machines. It suits a serious home or small professional shop with 230V power and room for a floor-standing unit; it is heavier and more expensive than a benchtop jointer, and the insert head adds cost over a straight-knife machine.
In stockReturn policy
The JET JPJ-12BHH is a combination planer and jointer that performs both surfacing and edge jointing on one machine. Its 3HP motor runs on 230V. Changeover between jointing and planing is quick, and the fence stays on the machine during the switch.
The cutterhead is a helical head with 42 four-sided carbide inserts, each measuring 0.59 x 0.59 x 0.10 in. The cutterhead is 2-3/4 in. in diameter and turns at 5,300 RPM. Planing runs at two feed speeds, from 16 to 26 FPM.
The tables are heavy-duty cast iron with a ground finish, and a parallelogram design keeps the table close to the cutterhead for depth-of-cut adjustment. The stand is a heavy-duty one-piece steel closed stand with mounting tabs. A large handwheel adjusts the planer table, and the 4 in. dust port requires a dust collector rated for at least 550 CFM.
It checks today's price at every store, compares the alternatives and answers in about a minute.







