
JL Audio Dual 12" W7 Ported Enclosure
Best price now
Prices are checked against each store and labelled with when.
Ask our agent about this product
It checks today's price at every store, compares the alternatives and answers in about a minute.

Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
This is a custom ported enclosure built for a pair of JL Audio 12-inch W7 subwoofers, with 4.0 cubic feet net internal volume tuned to 33 Hz. It uses 3/4-inch Russian Baltic Birch with a 1-inch 17-ply front baffle, a center internal brace and a carbon gray stained, polyurethane-coated finish. It is aimed at car audio builders who want deep, clean output from two W7s and would rather buy a finished box than cut one. Against generic prefab boxes, the thicker baffle, real bracing and 10-gauge pre-wiring are the main advantages; the trade-offs are its size and the fact that it is built around one specific driver.
In stockReturn policy
This is a ported enclosure for two 12-inch JL Audio W7 subwoofers. It has a net internal volume of 4.0 cubic feet and is tuned to 33 Hz. It is made in the USA as part of the Basshead Supply Branded Series.
The box is built from 3/4" (18mm) Russian Baltic Birch plywood with a solid 1" (24mm) front baffle of 17-ply birch veneer. A center-mounted 3/4" (18mm) internal brace adds support. The panels are joined with Titebond III adhesive, so no screws show on the outside.
The finish is carbon gray stain with a protective polyurethane topcoat. The enclosure comes pre-wired with 10-gauge OFC speaker wire and recessed satin nickel brass terminals.







